Hollywood Posted January 5, 2011 Share Posted January 5, 2011 (edited) EDIT: Forget about that.... problem seems to be somewhere else... Hey guys, i' run in a bit of trouble with the v-mods on my 275 Lightnings. The cards got ocp, vgpu and vmem mod on it. Testet the mods while running on air and everything seems to be okay. So, when i am goin to pull down the temps, the cards stop running. When rebooting, the vga bios gets loaded but a few secs later, i am getting a CMOS Error. All mod have an on/off switch. If i switch the mods to off, the card is running normal under cold. Could it be possible, that the VR's dont like it cold? They are placed on the backside of the cards between the power connectors and the pot. Any help would be much appreciated . Thx for reading EDIT: Forget about that.... problem seems to be somewhere else... Edited January 5, 2011 by Hollywood Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.