Hello guys,

since a few of you may have a 2080ti kingpin i wanted to share with you my solution on using the card in a daily custom watecooled pc.

 

The issue is that if you remove the original cooler and mount a vga only cooler or something like this memory wont be cooled anymore. 

 

My solution was to modify a EK WB VGA only waterblock so it fit s the gpu with the mem cooling plate on.

With a CNC i milled the cooling plate of the  block to 37x37mm On the sides I milled 1,5mm deep. 

The result looks like this:  and temps are great!   The only thing you need then is new mounting screws. I took some M3 with nuts.