Jump to content
HWBOT Community Forums

dannyzeiger - DDR4 SDRAM @ 4400.1MHz - 44sec 315ms PYPrime - 2b with BenchMate


Monabuntur

Recommended Posts

Hi, I was looking through the submissions to see how well the benchmark scales on other systems with different ram, and I noticed you got a relatively low score for your setup (which is basically the fastest PC you can buy at the moment); Since this is a new benchmark and people might not know yet what to prioritize, here are some suggestions to get a better results: You might want to get the FCLK/UCLK (infinity fabric and memory controller clock) to a 1:1 ratio (I'd start with 1800MHz, then try to get it to 1900MHz), then lower the DRAM clock to 2x that of the FCLK/UCLK. After that you can start tightening the timings, CL20 is quite bad, I think you should be able to get it to at least CL16, the results here will depend on your memory though, but generally the lower the better! Sorry for being annoying, good luck with your benchmarking!

Edited by Monabuntur
  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...