chew*
-
Posts
589 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Events
Blogs
Posts posted by chew*
-
-
My board is in oven now after a 3 day acetone bath, prays.
-
My boards acting retarded atm ever since i stuck a 650 in, praying to OC gods and giving acetone bath for the time being.
-
I'm going back and looking at everyones submissions. my mem is crap. massman wtf? is that just lynnfield or a really good kit? All of you are kicking my rams ass. is everyone pretty much using a elpida hyper kit and all of my kits are garbage? im seeing george is doing 1880mhz at 6-7-5-18 with gtx2. arent those like 200 bux for single stick? and massman is at 2100 at 7-7-6 also with the gtx2. damn! a few months ago I was at the corsair site and ordered them then benchzoner told me I paid $200bux for a single 2gb stick. I canceled the order because I thought it was for 2 sticks. now I can finally see why they were 200 bux a stick. i have 4x2gb hyperx 2000 cas 8 kits and 2x2 gskill pi blk 2200 7-10-10-28 kits.
I still havent really taken the time to max them out. I think the highest vdimm ive gone is 1.7v with air. may I ask you guys what your vdimm is at on those gtx2 kits on air?
I have plenty of hypers here, and after we are done we can go to skatepark, see if i can crack a few more ribs and shatter a wrist perfecting my 180 ollie to 50/50 grind on the bench to ollie 180, that is if they fixed the bench since my ribs broke it.
-
wow 5-6 seconds? I didnt think it would make that big of a difference. I need to go back and mess around more.
Thanks man.
@chew. thanks I cant believe your ln2 is so cheap. I pay $70 plus tax in the city to fill the 35L.
I brought it to work.
I just found a guide to work that ocx thing.
man.... I was way off!
Yah it's my frequent flyer price. Comes with time. Took me a year of non stop benching to get that price, I use to pay what you pay.
-
think sams runs were suspect for speeds, is the time possible sure, at that uncore? I doubt it.
msimax live in ummmm the city? I forget where to be truthfull even though I have been there in person.
Ln2 situation is rental dewar is 50c a day and cost me with tax like 36 to fill one ( 30L ), my dewar is in shipping atm.
Has to be filled by 12 noon saturday or your bumming.
-
I don't want to push my luck but is it you cool with you if I bring 2 of my buddies? ones a black guy and the other dude is a robot. They are really nice and will throw down on the Ln2. The robot can do beer runs or go to Radio Shack if we run into trouble. because he's a robot and alcohol doesn't really slow him down. We go bar hopping all the time in nyc and no matter how many drinks he's had he always insists the he drives to the next spot.
the black guy is the head engineer on a space ship so bios settings are like 2nd nature to him.
Best to bring one guy or find a way to tag along with msimax if he's coming. Black dudes are cool, I'm a minority here, most of my buds are black.
-
Chew what are you doing this weekend?
reviews and overclocking.
My board is 95% waterproof now + modded and ready to rip but i have 2 sets of ram that quakecon put me behind on so thats prioity 1 atm, doesn't mean someone can't bench on one of the stations while i work though.
-
hmmm 2:12 works fine for me to. no waza.
George your problem is QPI, I ran higher, it was slower. Sometimes less is more.
-
here we go, those mod might help you to get better overclocking score.
Cold bug mod for clarkdale
Vcore offset mod
HiCookie
Cookie,
Can you explain the difference or the benefits of the CBB mod you posted versus just changing the resistance to 0K on this resistor?
-
Yes.
Newest C3 silicon of Deneb beats the crap out of TWKR anyway
hmm I wouldn't go that far but the one survivor I have left is obviously not TWKR 42.
-
yep looks like sub 8:50's possible. Nice run pro.
-
maybe just let the others know what is involved in doing the mod
Sure theres a number of things you can do....remove resistor and connect the 2 points with solder. bridge the top of the resistor with solder. Last you can solder a wire in on each side of resistor and use a jumper pin on a fan header from a old mobo.
Basically you want 0K reading at that res. IIRC its like .75X k ohms nominally.
-
If testing those pins you will test one pin in socket and all resistors in general area both sides.
When you find continuity you test other pin in socket and other side of resistor.
Just solder across that resistor and you should be good to go.
-
btw chew that stage 1 submission kicks ass. I think that will keep everyone busy for a while. okay get back to work.
It's actually preety slow
No need to guess. you will find continuity at a resistor on both sides and each of these 2 points on all 1156 boards.
http://chew.ln2cooling.com/Max%20III%20Extreme/Hard%20mods/IMG_2671.JPG
Ok here' you go.......
clarkdale CBB mod point circled green according to pin outs.
-
dino quit screwing around and get in here with me. Lets roll man!! are you just gonna hold back until the last second of the contest and unleash the beast? cmon dudes this isnt an ebay sniping/ get in here. lets see the real deal. btw the guy that got the clocks in stage 1 you guys are killing me. the hw dudes shoulda made this contest a little better. split the lynnfield and clarks the for the 4ghz stage one. Or is stage one for lynn and clarks for 2? ohh okay..I see. nevermind.
I jumped in for you
Despite my workload.......now it's time for me to ship stuff and pack up for quakecon, see you guys after the 15th sometime.......Ok this is preety funny
I propose that giga gives away 1 prize.......but not for the best scores.....a prize for the most ridiculous hardware config imagineable LOL
-
Hmm interesting contest
-
I caught a drift of sarcasm in your reply chew*. If I'm wrong correct me... Yes the 1090T memory controller issues will play a huge roll, but the GPU of choice is going to be the leading factor if you ask me.
Actually thuban IMC will not play a role, as i was saying there's only a couple board that clock highe but the performance is slack.....move to a couple other boards and all hit a wall at 920 and have performance of the board that can do 1000 max cold.
so since deneb can do 920....and clocks higher and has high cpc performance.....it's guranteed win.....it will play out like this.
The more effecient board tuned for ultimate overall performance and a very fast card excluding 5XXX series on ln2.
My prediction from ati camp is 4890/4870 with favor towards 4870 if someone really goes all out with mods.
As far as nvidia, i will leave that prediction to someone more knowlegable on NV.
I might toss up a result but i won't have time to play hard. I think i have one 965 left that would be well suited to 01 and a decent 4890, board will be CH3 or MSI.
I might even favor a damn good set of d9's @ 6-5-5 over hypers at 6-6-6.
-
I think it's really going to come down to the GPU. A good Phenom clock in 3DMark 01 should be enough..
Ok
-
I call 965/955 winning this over thuban.
Only one thuban in world can match 955/965 for raw clocks......
Only one board is capable of insane ram speed with thuban, that speed is sheared to 2000 when cold and bandwidth is not that great
etc deneb faster cpc. -
not mine, hang c1 hang 8.8. then everything just shut off....game over.
-
Your putting words in my mouth. If anything I gave every "tip" possible without saying it flat out that thuban would not win this part of contest
-
clearly one chip needs alot more voltage to do XX speed and the other chip isn't fond of volts
-
He's at work.
He benched on my board with his cpu at my house thats how i know
-
I will vouch for the mobo used , he screwed up when he took his screenshot and has times a tad slower with it. Also he has many photos to back it up.
If anyone want's to call me a liar and be unsportsman like feel free to reject it
The official GIGABYTE H55 miniITX contest thread.
in HWBOT Competitions
Posted
Mine had reboot loops issues after doing mod but it never saw cold, it eventually just stopped working while pretesting on air with a 650. It just loops now.
My bath and bake seemed to help none at all even after all mods removed. You win some and lose some, thats the name of the game.
O well time to see if i can pull a results out my ass in the AMD 01 challenge with almost no pretesting done.