[ROG Maximus XII Apex]

14 hours ago, str8_an94baller said:

for 24/7?

 

that seems a bit extreme...

why?

[ROG Maximus XII Apex]

On 8/9/2020 at 6:20 AM, marco.is.not.80 said:

Like someone already said you need to get that system agent voltage way down. You're killing your CPU. Also, your core voltage - 1.570 - don't know what kind of cooling you have but the only thing that would support 24/7 voltages at that level would be if you had a big ass water cooler instead of a radiator and even then - it better be an industrial size with a pump to match.

for SA 1.45 V was the safe limit for 6th gen, but Intel's 14nm has improved a lot, so up to 1.65V is fine since Coffee Lake.

My chip is delidded and has a Supercool computers direct core mk6 block fitted to it with conductonaut. Under load in realbench Vcore droops to 1.43V under LLC6 and temps stay below 70C for all cores, so should be fine, no?

[ROG Maximus XII Apex]

2 hours ago, Sparky's__Adventure said:

@skullbringer Maybe see if you can tighten some of the other subtimings more.

I'm able to push 4666 17-17-17-28 280 on a z390 dark (albeit my current memory isn't good enough to push that daily) with twr 10, twcl 14, twrrd_sg/dg 26/21, and lower trtp and tcke.

I don't know if twcl 14 is possible above 4666 ratio and tcl 17, as my memory and board can't push it. The other timings should be doable, though.

thanks for the input! I needed trtp 9 for stability beyond 800% hci, but I will definitely give the others a try

are you running cr 1t or 2t? 

[ROG Maximus XII Apex]

hey hwbot forums folks, I'm sorta new on here

this is my current setup, intended for 24/7:

• anything I can improve on, maybe Apex specific (apart from ppd 0)?
• you reckon 1.43 Vcore under load will degrade noticeably or is it fine for Intel 14nm++++?

[The official BenchMate support thread]

9 hours ago, _mat_ said:

What GPU are you currently using?

Quadro FX 560, just something that puts out display and fits in pcie slot I thought, but after not being able to run realbench, this is the second limitation I found for CPU benching with this gpu 

[The official BenchMate support thread]

13 hours ago, _mat_ said:

 

oh ok thx, I searched for "violation" in this thread, but it did not come up. Well, at least now it does

Can you give an eta of the fix version or would you recommend I order a newer gpu?

[The official BenchMate support thread]

Hello, I get this memory violation error everytime I try to start any Cinebench. What am I doing wrong?