![](https://community.hwbot.org/uploads/set_resources_1/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
nachtfalke
-
Posts
860 -
Joined
-
Days Won
8
Content Type
Profiles
Forums
Events
Blogs
Posts posted by nachtfalke
-
-
-
merry christmas all
i was a bit lazzy to mount POT o vga , to grab this WR ...but never is to late:D
-
LN2 + Bining = win big countries ... hit & run ........... no tweaks ... no big skills
wrong , when you benching on cold especially on LN2 need more skills that you think, os tweak´s are legend
congrats to winner and other participated country!
-
that is the point , i pay lot for LN2 , that i made those cascade:D
regards!
-
i´m not salled because is for me
done by me..so i put inside lot of work and soul , both are designed with universal mounting kit( gpu/cpu ) , evaporators are 42mm diam / 60mm tall , i use thermostatic expansion valve in first stage for R507A and in second stage cap tube 1,2mm because at those large capacity rotary´s. and ofcourse R1150 for best temps , i expected -125*
will see
if you asking about my monster SS , that is , 28ccm rotary 16k BTU rotary:D
-
yes, because the test is not so long , but if you change on the monster gpu can´t hold good load:)
i have in progress 2x cascade : small one with compressor 21k btu in first stage and in second 17k btu ..i designed for 400W load at -100 ( R507a and R1150)
and another monster cascade have in first stage one compressor 25k BTU and second stage 22k BTU
that will be load king
-
not big rotary but still enough for haswell , charge first stage with R404A or R507 and the second with R1150(etylen) is the best solution, if the first compressor are designed for R22, change the oil with POE oil before charge with R404/R507
-
nice rotary´s have you in cascade , how much BTU it have , cm/rev? r407c or R410a?
-
thanks!
because is samsung ddr3 ic´s 2.25v still enough , i use 2,2v , but remember must also the gpu controller good to reach that clock!
-
massive:D keep pushing!!
-
strange cpu arhitecture anyway , i hate haswell ....just hope with brodwell i have better luck:D
-
ofcourse, for those clocks if the GPU scales ok on cold need atleast 1.58vgpu ...
-
thanks! , chip is crap can´t bench on w7 over 5700mhz...
-
that is very good if you measure temp on socket , on the evap must be ~ -90*C
really nice stuff!
-
nice results! what load can hold the cascade? also temp on haswell?
-
nice score:) good efficiency
-
last one.
-
nice start , but the pic is from another platform!
regards!
-
that G-power are really pice of art , bad that is not as retail for sale!!!
-
very nice mem controller in that gpu , that is very rare!
-
Qimonda IC ram´s? great job!
-
-don´t use oc profile
-configue all oc settings manual
-ln2 mode -disable
-
ca scorul sa fie valid , asa trebuie sa arate un screen:
-
nature subtest is BUGGED!
nachtfalke - Radeon HD 5770 @ 1200/1590MHz - 141568 marks 3DMark2001 SE
in Result Discussions
Posted