Jump to content
HWBOT Community Forums

sin0822

Members
 View Profile  See their activity

  • Posts

    757

  • Joined

  • Last visited

 Content Type 

Posts posted by sin0822

    Who inspired you to start overclocking?

    in Offtopic

    Posted · Edited by sin0822

    I like to quote sin0822 and change what he says and suck on his dick because it is the most fun thing I have the ability to do

     

    Honestly dude I do what I want, when i want, and how I want. You are going to cross a line we cannot come back from.

     

    oh also Hipro5 did get me into modding things.

    Chilly1 got me into phase change, but i hear we shouldn't say his name out loud anymore, but i was gone for 5 years so i missed a bunch of stuff.

    Caught!

    in Offtopic

    Posted

    A lot of peep here own a computer store. Lol

     

    It'll be nice to post a pic. with minimum $20.000 worth of hardwares:)

     

    they better not put their address there either lol.

    The Fail

    in Offtopic

    Posted

    Apparently I killed a possible 7 GHz Phenom II CPU by mounting the pot too tight...

     

    I did that twice

     

    Also the acetone thing with a pot i didn't seal off corroded the conformal coat on the PCB, which i failed with too because I used acrylic based lol. I guess you live and learn and then get lost.

    TridentX + Z77X-UD5H: Set TRRD=7

    in Ivy Bridge (Z77) OC

    Posted · Edited by sin0822

    maybe i should have posted this or i might not have here, but F6X and F10X use a different bootup sequence which bypasses some things which limit the samsung's speeds, The BIOS isn't meant to be a beta BIOS in line with the others, just to fix 1 or two problems. The(person who made the BIOS) already knew it would have a negative affect on some other types of memory.

    The inconsistency thing is a bit odd too, like you said, a different boot up sequence works. Like if I set 2600mhz with the samsung ULV and then goto 2400 then it will fail to boot, but if i go back in and change the multiplier to 26x no issue it works. I have to clear CMOS and load a saved profile for the 24x to work, and if it doesn't then apply the settings again and it works. It seems that it is fine with booting and such unless you go into the BIOS and change a memory setting. Of course with BBSE it prob is different, but this might be good for booting with higher multipliers for screenshots and such, but this boot sequence will just be engaged when the board recognizes samsung ULV. Otherwise it wont be like this in future BIOSes for your BBSE.

    TridentX + Z77X-UD5H: Set TRRD=7

    in Ivy Bridge (Z77) OC

    Posted · Edited by sin0822

    What about with F10X or F6X on the UP5 TH is it more or less consistent? I ask because the test BIOSes use a different start up sequence which bypasses issues with thermals.

     

    With this BIOS i noticed if one goes back in and changes a setting on the samsungs(like even go from 26x to 24x) then it might fail to boot, however booting with that memory timings set over and over isn't and issue either is a cold boot from the cold boots i tested. To make it boot again one must reset the CMOS and either load your profile or not.

     

    IMO even if i set all the timings manually it is still a good idea to set the XMP profile, that way the timings int he background are consistent, some of those timings change also with dividers.

×
×
  • Create New...