LeGaL^CriMeR

@johnamd right. OCGENIE could not submit such a bus! 224 is too much.

Not necessarily, windows xp works only in ide mode success

unfortunately I can not pass the test again, will wait for new memories, g.skill ECO 1.35v. OCGENIE filed in my memory too low voltage that is less about them. Because it is not certified for p55 boards. 1:100 to successfully pass the entire test super pi. Yet if not big problem, and feel that can be left result leave. Here is what the error shows me problem makes it nearly every Lop I show you the last.

ok delete my score Level 2 and to nab a job:) Hopefully no errors superpi, most of my crashes where the 21 loop

Hope massman to speak he did. But if it is as written in the rules, I think no problems.

simple picture is made ​​somewhat later, because running the test several times. If this is a problem. Tell me what to do test again and get it again. I did this because the 21 Lop stuck my super pi with error "Not In exact round" I say if there is a problem, tell me what to do again. To ensure my participation. I am honest and do not use Cheats and hacks.

My board itself changes its frequency by 1Mhz not think this is such a big problem. Funny is it for overclocking hand 1mhz fsb above. When the option is enabled OCGENIE, bclk buttons do not function or the BIOS or with software or from elsewhere can not change fsb frequency.

As for the participants: "OCGENIE" who once already tried to deceive us. And I think it is right to not be allowed to contest.

Sorry my mistake:) Obviously the first stage and can no super pi. But I think it is good to have it both and the clip is the same. Because we are all uploaded the same clip, and so easy anyone can upload a fraud if a different clip. ---------------- for your problem. Otherwise, and I had problems with uploading video and score at the second level, I wrote a little further back how I fixed the problem.

You mean that lie with 1Mhz in FSB? This is ridiculous

I see no problem, this is the normal difference in loaded and unloaded condition of the processor.

@04ahgy Sorry but. The two videos that you did not have the rules

No results from Super PI!!!

Not reset the BIOS, so he is not a valid result

Not reset the BIOS, so he is not a valid result

10x

When I was stopped when the option from the BIOS (OC GENIE), even if it is pressed, your logo is normal and is off option ocgenie But in the case of "OCGENIE", he neither set of BIOS defaults, neither shows the inscription that appears after activating ocgenie. I do not know whether it is in the rules but is full of darkness. Also as seen from my clip, then press the button and start OCGenie system has at least 10 seconds while waiting OCgenie overclocking the CPU.

Definitely not normal

Now having looked in the video posted by OcGenie, I noticed that he also has not given CLR_CMOS. Or at least to load settings from BIOS default. If wrong correct me.

nice

Congratulations to Christian Ney:) As I wrote on the back, it is impossible the same processor clock them differently! People like yamahar1 should be removed from HWBOT.

Do not look post screen, OCgenie where is blck option buttons work, so after pressing the button, people can immediately press the + (plus) and overclocking the CPU Dock reach the post screen I say it is impossible for the same processor and motherboard, then pressing the OC Genie are overclocking differently.

Leaving a party error in initializing the processor. I speak specifically for overclocking which is achieved with ocgenie, how much different from mine in the same machines.

Leaving a party error in initializing the processor. I speak specifically for overclocking which is achieved with ocgenie, how much different from mine in the same machines.

Leaving a party error in initializing the processor. I speak specifically for overclocking which is achieved with ocgenie, how much different from mine in the same machines.