MTB Scotland

cheers. Had some issues getting in to the forum hence the late reply.

nice - wish I could get my memory higher.

not sure if you have enough fans there lol

Reinstalling the drivers worked but I get an error after batch 4 Error: Invalid partial result by a margin of 0.000000003185910. Tried combinations of batch and reduction size but makes no difference OG START at 2022-01-11 22:17:56 ---------------------- HWiNFO library for extended hardware detection successfully loaded. Timer initialization: QPC is available OS detected: Windows 8 or higher CPUID: AuthenticAMD (Family: 15, Model: 1, Stepping: 1) CPU detected: AMD Mainboard model detected: X470 GAMING M7 AC (MS-7B77) RTC is not safe to use on this system! Timer: HPET (14.32 MHz) CUDA is not supported on this system (Error: CUDA driver version is insufficient for CUDA runtime version) CUDA devices initialised: => no devices found. OpenCL GPU devices initialised: => AMD Accelerated Parallel Processing 2.1 - AMD Radeon RX 5600 XT (18 CUs, 1660 MHz, OpenCL 2.0) (PCIe: 0000:29:00.0) OpenCL CPU devices initialised: => no devices found. OpenCL Accelerator devices initialised: => no devices found. Timer initialization: QPC is available OS detected: Windows 8 or higher CPUID: AuthenticAMD (Family: 15, Model: 1, Stepping: 1) CPU detected: AMD Mainboard model detected: X470 GAMING M7 AC (MS-7B77) RTC is not safe to use on this system! Timer: HPET (14.32 MHz) Decrypting kernel source: IDR_OPENCL_PI Decrypting kernel source: IDR_OPENCL_PI Decrypting kernel source: IDR_OPENCL_REDUCTION Decrypting kernel source: IDR_OPENCL_REDUCTION Starting run to calculate 1000000000 digits with 1000 batches Batch Size: 1M Maximum Reduction Size: 16 Spawning 1 threads for scheduling workloads to devices.

Its an RX 5600 XT open CL is not ticked anymore on my GPU. I'll reinstall driver

Stumped with this. CPU works fine. Debug log LOG START at 2022-01-10 21:26:20 ---------------------- HWiNFO library for extended hardware detection successfully loaded. Could not open file handle for loading options file! Could not load options from file! Timer initialization: QPC is available OS detected: Windows 8 or higher CPUID: AuthenticAMD (Family: 15, Model: 1, Stepping: 1) CPU detected: AMD Mainboard model detected: X470 GAMING M7 AC (MS-7B77) RTC is not safe to use on this system! Timer: HPET (14.32 MHz) CUDA is not supported on this system (Error: CUDA driver version is insufficient for CUDA runtime version) CUDA devices initialised: => no devices found. OpenCL GPU devices initialised: => no devices found. OpenCL CPU devices initialised: => AMD Accelerated Parallel Processing 1.2 - AMD Ryzen 7 1700 #1 (16 CUs, 2994 MHz, OpenCL 1.2) (PCIe: undefined) => AMD Accelerated Parallel Processing 2.0 - AMD Ryzen 7 1700 #2 (16 CUs, 2994 MHz, OpenCL 1.2) (PCIe: undefined) OpenCL Accelerator devices initialised: => no devices found.

That is a lot of volts you put through the chip. What are you cooling it with?

downloaded BenchMate 0.10.7.2 and avast is telling me it is infected with IDP.generic

how did you unlock the bios?

Going to have to do a lot more than report valid results to get back 3rd place.

you've put the wrong score in - should be 75.32 according to your results tabs

what sort of temps are you getting on the ram and vrm without the fans from the cooler?

best memory score

no, just letting people know.

is the card volt modded?

various types of HD 3470. can have DDR2 or DDR3

how did you get the block on the GPU given the mounting hole width?

you didn't enable 12 threads in the advanced settings I see. I did that on the 32m calculation first.

11c minimum on air?