Timmee

creative.rom, but please look for Alex@ro's guide in the first post.

I think it flash rom file from usb stick as the programmer would do it. I needed this to downgrade ME. This way I did it, but maybe flash could be done for example with afudos, if the current ME version is old enough. Before flash, I used FD44Editor to set original values for MAC, System UUID and Motherboard S/N to jjxaker Mod bios.

Cpu pads guided in this post And mobo bios pads are the same that in the “original” mod posted by Alex. Thank you Alex Tested modding M10A bios version 1301 with jjxaker tips and got AURA working this time. Here is screen capture from the test run.

Thank you jjxaker. You were brave enough to test M10A Bios Rog-modules with M9A. Bios is working with 8700k and finally hyperthreading I flashed bios by using flashback and screwdriver to connect bios flash pads (pads surrounding covered by electrical tape). Cpu pads are connected with silver paint and isolated with electrical tape. So no soldering is needed to the motherboard. One minor issue. If I open the bios file in UEFITool it shows error "parseSection: PE32 image with invalid DOS signature" and it is under section 91B4D9C1-141C-4824-8D02-3C298E36EB3F -> EE4E5898-3914-4259-9D6E-DC7BD79403CF. Can be fixed by replacing that section from M10A bios. jjxaker, could you tell me which are the AURA-section GUIDS to replace for mod? Are there other than E98D33CD-1AEB-46B1-A4B6-0BB4CC655C26, BC327DBD-B982-4F55-9F79-056A D7E987C5 and 611F7FDD-C7C6-4CFE-8072-2155D7B25A80 to make AURA work? I made bios mod from M10A bios version 1401, but AURA not working.