Mat_Agnesi

G6950 Cooled by CM Gemini II M4 + Phobya FAN

This bench make my cpu very hot! reach 85° degree with a T.amb of 25°. I do not try it anymore

Thanks

Great !!

Very very good... you got Hardware and Global points here !

Maybe I Don't really know if the 1.480v is needed. The card shutdown when I push more than 860MHz GPU, I think it may be caused by the Over Current Protection.

The Over Voltage Protection Shut down the card when I give more than 1,480v to the GPU

Very good place. I see you have changed the fan

The GPU temp remain under 50°, but I think the problem is the standard VRM Circuits of this NON-Reference HD4850 that is near is limit. The VRM became very hot and I've already placed heatsinks to Inductors and to Mosfets. By raising the extra 0,050v overvolt I only gain 10MHz!

Excellent VGA clock if consider the Stock Cooling !

No, not outside, I bench in a very cold room. That room is unused during Winder, it miss any form of heat generator and also miss insulation. The Temp inside that room usually is = Outside temp + 5° Degrees.... Now the internal temp is about 9° Perfet for bench

slight increase. I see other people with that card use more aggressive voltage. Many run at 1.650v even with normal H20 cooling.. I'm at 1.500v. Think I may raise vGPU to 1.550v beacause the temp is very good

Thanks

GPU Voltage is 1,500v, DDR3 voltage is 2,100v. During test the GPU remain at approimately 45° celsius temp, that is a good temp. But I don't want to give more than 1,500v to the GPU. What voltage for 1180MHz WR ??

2nd Run, adding VGA's DDR Overvolt mod, more CPU frequency, more Ram Frequency.

Tnk, my Ballistix is the 8Gb version, the last one with LED, so it may be different, but I will try it ! very good if can run 1070 Cas8

Wooooooow ! that score is also you're best global 3DMark2001 run !! very impressive

I find the right subtiming to be released to make the system completely stable with RAM at 2156MHz 9-10-10.

ehehe yes It must be runned with higher frequency, less active cores and no HTT

Tnx. If I remove the "Over.Current protection" that limit the Max. overvolt, the GPU will Overclock more. But that VGA Is not mine, is from a friend. I don't want to do many mod on a VGA that isn't mine

another very good run.. we are now at 6,500

21.7 points now... very good !

Thanks.. the low ambient temperature help me, there are about 10° degree in the room with PC

I'm using a RAID 0 of 2 x crucial m4 SSD, This seems to give about 2,500 more points than single disk. Unfortunately the web page tweaks optmization doesn't work on my pc