-
Posts
2012 -
Joined
-
Last visited
-
Days Won
7
Content Type
Profiles
Forums
Events
Blogs
Posts posted by ObscureParadox_3XS
-
-
15 hours ago, Leeghoofd said:
This is going to sound really anal, but my OCD is kicking in big time Can you put please have the DDR's in alphabetical order for my sanity please
-
Bump! Added some Asus motherboards and GPUs
- 1
-
Good stuff dude!! I didn't realise you were still benching :)
-
With regards to the CB changing depending on FSB, this is similar to what happens with Athlon 64 for example in my personal experience. These wouldn't be necessarily correct numbers but just to use it as an example now.
200-600FSB - 140cb
601-620FSB - the cold bug gradually gets worse etc, feels like an FSB wall limit but increasing temp actually let's you set the higher FSB which can be a massive pain. It only seems to happen at the highest possible fsb's for any given chip.
- 1
-
3 hours ago, Noxinite said:
Come on people, ambient = room ambient. Not external ambient - that doesn't make any sense. No-one will voluntarily have a -20C room which they have to live in.
Actually that's exactly what I did when I started out benching. A bunch of my Socket 478 scores on water are done in winter, at night, with the window wide open in my room. Ambient probably about - 5c in my room. Even in Wales we don't get the chilly - 20c I dreamed of.
-
On 3/9/2020 at 11:17 PM, ShadowLight said:
Hey everybody! I am just starting, the platforms that I am mainly going to be doing are am4, 775, and 1366. I am just getting started with hwbot, are there any sort of unspoken rules that I should know about? Thank you all for being a great community!Just don't break my 775 scores and we'll get along just fine ?
-
Very nice set of CPUs sir!
-
On 3/5/2020 at 7:24 AM, Leeghoofd said:
you got pm
You sure it didn't 404?
- 1
-
naww man, you know how much effort it was to run this xD Just kidding great score! Will have to try and beat it again sometime ;)
-
Ahh awesome score! Was waiting to see someone post some results with this board :D
-
3 hours ago, marco.is.not.80 said:
Just so you know I didn't mean to suggest I would be using Crossfire (and pretty sure that's not allowed) but rather I purchased an extra one in case I blow the first one up modding it.
Oh no no don't worry, I just had that light bulb moment when I looked at the rules and saw it wasn't noted.
- 1
-
1 hour ago, TerraRaptor said:
Have no idea why none tried high fsb and 2:3 or 5:8. Pifast gains a lot from fsb. I did 22.44 with all air setup.
I think I was the only one to do 533 on 1:1 too from what I can see I just never got it 100% stable and might have forgot that today was the last day
-
I just noticed something now which isn't down in the rules but I feel like it should be, can we limit the competition to 1 card only? Just feel like a quadfire setup in this competition kinda goes against the whole ethos of it
- 1
- 1
-
Because some people chose to abuse the system and play innocent That ruined the fun for all.
-
Just as an FIY for future ref, you should be setting a price as part of the forum rules.
Edit : nvm, didn't see it was a want to trade thread- 1
-
1 hour ago, gtxx58 said:
I put some time on ddr2 recently, and the best way to bin ddr2 seem to be 32m spi, I set my voltage to 2,4v to not damage it, d9 is very sensitive to temps, just put better heat spreaders on it change everything, recently I manage 720 32m spi with single stick (5-5-5-15 at 2,42 bios) on air, some stick seem to cbb at -115 and cb at about -150, different result than noxinite ? maybe different pcb change cold bug
i dont no if my board do magic on spi 32m or its just the stick, i also have 1 stick with different ic doing 750+ but with loser timing 5-6-5-16
To be fair his result with cold bug was due to information from myself. I had about 3 sticks cold bug on my phase which does -55c ish. I've since taken a couple of sticks cold and both of mine got full pot so I must have just been unlucky with the first 3.
For max MHz binning though I think you can just get away with doing just that on air. Set a voltage paramater and timings etc and just see where the sticks crash. Is a hell of a lot quicker than binning for 32M. Bigger problem for me though is I now need to start binning motherboards as my only two P45 boards hit hard limits on the memory controller that no voltage or timings could overcome. Again I don't know if I just got unlucky here or not but I'm not even close to hitting the limit on my 850MHz stick since it could do those speeds at 2.3v or there abouts.- 1
-
If they're irrelevant then why hide them?
-
You're benching again sir?? o.O
-
Leauges is always a sensitive issue. We have the current league system because people were complaining that those using phase didn't want to be compared against those using LN2 etc. No matter what you do 50% of the people will be annoyed.
- 4
-
Damn that's big :O
-
13 minutes ago, ground1556 said:
775, no intel chipsets, 9x multiplier, Geekbench 3 Singlecore (or any other bench thats somewhat mem related)
Some people just want to watch the world burn
- 5
-
-
Could also say just Pentium 4 DDR2? That way it if anyone wants to use a 478 to 775 adapter they're more than welcome to. It wouldn't be as competitive but it's opens up the options a bit
- 1
-
bump, X58 Classified Price Dropped and a couple of EK LN2 kits added.
HWBot Team Cup design thread 2020
in HWBOT Competitions
Posted
I actually had to Google the Chipset.