-
Posts
198 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Seby
-
-
No boot or no AVX512? No 13th gen cpu has AVX512
-
Yeah, either way most I could boot was like 9060 ish, I mostly just got bored after clearing cmos and having to wait a long time, only to have it freeze when adjusting bclk at what had worked before. I only tried for like 30m on ln2 since I wasn’t doing much better than ambient, and my time was better spent rerunning storage bench.
-
I bench on my daily setup with a capture card, and I use a LG CX 48 as my main monitor, so 4K is super readable.
With no drivers installed, you can’t change the resolution, and changing the scaling messed with some programs especially OCTool, though I have a solution to that, and a way to force 1440p, I just didn’t bother because the extra resolution makes it easy to have hwinfo (3 tabs wide), cpuz, oc tool, and cinebench all open, since hitting positive temps on this platform is real and I wanted to see how bad it was sometimes (across 64 or 96 cores)
Besides, the scaling on the benchmate window makes it the same percent size as on a 1080p monitor, making it equally easy to get all the info.
(PS pro tip, to fix how windows scaling applies to HWINFO and OCTool, right click the exe, properties, compatibility tab, high DPI settings, change the bottom dropdown to System (Enhanced). I usually do just bench with 150% scaling)
-
1
-
-
What CPU? And could you get into BIOS? I think windows has microcode update if not stripped
-
Are you using a C0 stepping CPU? For me it works perfectly, just tested
-
1
-
-
Curious, can you run these memory settings at full pot temp? On old bios, I had to run pyprime at -160 and just ran 7.7-7.8, but now going all the way cold is easy.
-
10 hours ago, mcmanus9442 said:
@Seby9123 can you provide 0080 bios with u9 revision?? I tried copying it from MMtool but its saying the file is invalid when trying to use ezbios update
Sure
https://drive.google.com/file/d/1RI5CffFuUC8VzQ1ggP46Hb99Kv00gbgH/view?usp=sharing
-
1
-
1
-
-
Samsung SATA SSD SM871 256GB
-
Spent too much time on 8000 CL26 before things got really unstable. Next day just ran 8600 timings at 7200 and called it a day
-
Apex encore released after comp start ?
-
1
-
-
SLI is faster than I thought, even with low CPU clock, good job.
-
lol, benchmate seems to generate random numbers on AM5/TR5 with manual OC for some reason. Real voltage is CPUz voltage + .14 I think.
-
Yes, and pinout is here https://elmorlabs.com/forum/topic/spi-header-pinouts/
Though the modded bios is much easier and works just as well.
-
1 hour ago, mcmanus9442 said:
My z690 Maximus hero has the newer bios that does not have bclk oc. I tried flashing back the older bios, (with older bios flashback enabled) and it won’t accept the older bios. It flashes the led for about 3-4 seconds then goes solid. The ME has been updated also. Am I screwed?
You can just mod the bios to use the older microcode that supports it.Here is one from latest bios
Alternatively, you can use an EVC or other spi flasher to force flash the older bios, that worked for me.
-
1
-
-
On 11/25/2023 at 4:23 AM, Atom_Ant said:
Somehow this bios doesn't do the trick, will not bclk. Could you check pleasse?
try the link again, sorry (used the last avx-512 ucode instead of the bclk one)
-
(eventually this link will stop working, just lmk later)
-
2
-
-
Just 12 normal Zen 4 CCDs crammed into SP6
-
-
Finally 12x Overkill not a meme xD
-
Problem was just 1600 FCLK vs 2000 :D
-
8 minutes ago, Atom_Ant said:
Guys, how to get a 12th gen non K overclocker bios for Z790 Apex Encore?
Z790 APEX ENCORE 0506 modded for BCLK OC
-
2
-
1
-
-
For me, bclk oc is broken, to say the least.....
-
Nice, can’t wait to see what else you’ve got ;)
-
Seby9123 - Ryzen 3 5300G @ 5725.1MHz - 1min 24sec 248ms GPUPI for CPU - 1B
in Result Discussions
Posted