ruggero
-
Posts
102 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by ruggero
-
-
He bench on SS....smoke?)
I test 200 bad modules only 192 22279 air.
I do not know, maybe he was on ln2 and he don't remember...but 208 with normal air is impossibile in my opinion,in fact you have not found between 200 modules a module which have the same performance...192 2 2 2 7 9 is very different of 208 2 2 2 7 9.
When he will read this topic he will reply ;-)
-
i have kingmax pc150. all same results with it.
170+ 2-2-2-7-9 3.8v air
200 2-2-2-7-9 3.8v -70C
"In my opinion sdram capable of 200 2 2 2 7 9 on air don't exis"
how gigiracing bench on 210 22279 then? he told that 210 on air.
I test 200+modules of sdram this month....
ah,I understand your doubt
My ram with normal air was around 170/175 mhz 2 2 2 7 9,first time with cpu ln2 ram close superpi around 190.
Why?Because the smoke which exits from the pot cool the chips,with a fan in the right direction the chips was around -30°/-40°.
But my cpu pot was very long,i think gigio have a short cpu pot and the chips was around -50° or more...the smoke exits at -180°.
But may be it is a error,gigio have more than 400 cpu...10 benchs for cpu,is very hard remember the setup for 4000 bench,especially if it does not send immediately the score.
For example,i bench 200*10,5 last year,but I don't send yet my score
200+modules of sdram?You are crazy man:D...and your best module with normal air at what frequency close superpi 1m 2 2 2 7 9?
-
I'm pretty sure that "EZ" is short for easy as "not a problem".
The Hwbot forum filter swear words and change them in "bunnyextraction" or similar forms.
By the way you are rug22 isn't it?
Yes,rug22...ok,thank's for the explanation.
NO! i dont have that ram, but ez! at the moment only 213 2-3-3 -20C 1m and 215+ valid. ez 220+ on LN2. but this module very bunnyextractionty, pos find better.btw 230 3-3-3 so bad result.....
PS "bunnyextractionty" lol....wtf correction?
I find the book,ram was kingmax pc 150
1)170/175 2 2 2 7 9 on air 3,90 volt 1m
2)190/195 2 2 2 7 9 with cpu on ln2 and ram on "air"* 3,90 volt 1m
3)200/202 2 2 2 7 9 with cpu and ram ln2 3,90 volt 1m around -80°
*The cpu pot cools also the ram,I think ram as around -30°.
My ram were similar to those of gigio,3 MHz in less may be,but gigio use vdimm over 4 volt.
In my opinion sdram capable of 200 2 2 2 7 9 on air don't exist,as sdram capable of 230 2 3 3 1m ready,i have tested more or less 30 different chips.
I hope I was helpful ;-)
-
NO! i dont have that ram, but ez! at the moment only 213 2-3-3 -20C 1m and 215+ valid. ez 220+ on LN2. but this module very bunnyextractionty, pos find better.
btw 230 3-3-3 so bad result.....
PS "bunnyextractionty" lol....wtf correction?
Ehm...sorry but my english is not very good,if you use slang for me is impossible understand.
"that ram, but ez"...what's ez?what's "bunnyextractionty"?
-
1) 1.05.514 by gradus - bunnyextraction old result on wrong win.
240/180, not 185. but i think 230+ 2-3-3 mem better for 1m.
Wr frequency of sdram is 3 3 3 7 9 and you close a superpi 1m a 230 mhz 2 3 3 xx?It's a incredible ram,the bh-5 of sdram.
I sold that ram,but if you want I can try to find the model,I writed down this in a book,but I don't remember where is the book
-
200*10,5 1:1 2 2 2 7 9 = 100% sub1m
188.55 1.05.374 tera
191.31 1.03.982 grad + 2,76 mhz -1,392s -0,5s for +1 mhz
194.5 1.02.940 tera + 3,19 mhz -1,042s -0.3s for + 1 mhz
200 xxxxxx + 5.5 mhz...-2.5s...1.00.4xx
Now there are two score at 200*10,5 2 2 2 7 9
1) 1.05.514 by gradus
2) 1.02.379 by me...my score is just for fun,I wanted bench seriously but I sold everything :-(
But in my opinion for gradus is better 4/3 around 240/185 2 2 2 5 7
-
nope. With proper waza this will brake 1.02 for sure and probably 1.01. My estimations are that I need 1.4S @200fsb to break 1m. This setup is really close to my estimation in terms of performance. Proper waza + well tweaked os + known tweaks to superpi + tweaks to i815 are way to go below 1m with this setup. I had 1.03.5xx @194.5mhz with 1.4S. Almost 10% difference in ram should be more than 500ms and 70 mhz in cpu.
Uhm,in my opinion 200*10,5 1:1 2 2 2 7 9 is not sufficient to break 1m.
-
Do you have a vcore mod in your mainboard?
-
wow,very nice
sl6by,240*10,5@2,2 4/3 180mhz 2 2 2 5 7...i think is time for this.
-
wow,extreme fsb...how many mhz for superpi 1m?
-
we need some s370 competition)
Not by me sorry,I sold everything,in italy there is economic crisis. :-(
-
wow,i search it for years,thank's a lot.
Ok...may be I have second time...leaving aside the jokes, for my hardware go below 1.02 is impossible :-(
good luck boys
-
you dont have record) record set in 2001 and 1266@219fsb 219 2-2-2-5-7 ram. 59s 1m. I think i can beat it, but want find better mem.
Uhm,may be 1.02.379 is not my best time.
I rembember a 1.266 very impressive but i have not a screen for see the setup,do you have this?
-
>What mod do you have for vcore?A trimmer around 500k between ground and fb?
Nope, board is e-powered.
Estern psu give the vcore at the cpu?wow...i searching for have 2,8 vcore,but i don't find a good mod for tusl2-c/cusl2.
ye, have 180 2-2-2-5-7 ram, pos more on LN2. serching for 220+ 2-2-2 ram....are there sdram capable of 2 2 2 x at 220 mhz?My record will be destroy early
-
My ram is unable to go tRC=7 even @150mhz. And if i have LN2 to push 230*9.5, I would better try freezing ram and go 200-210*10.5 1:1 2.2.2.7 PIII 1.4S to break 1 minute.
Uhm...if you have a ln2 pot you can try 210 mhz 2 2 2 7 9.
What mod do you have for vcore?A trimmer around 500k between ground and fb?
And 225*9.5 cant do 1.02I don't know,timings 2 2 2 5 7 are very very fast...240*9,5...ok,but do you have ram capable of 180 2 2 2 5 7?
-
Oh, I should make 1.266 a try. Thanks for the tip, i'm newbie with this socket)
Tusl2-c can close superpi 1m a 225/230 superpi 1m,230*9,5 with ram@172mhz 2 2 2 5 7...this setup can destroy my time very fast
-
Good time,but is not yet the wr of socket 370
And,if you want continue to use tusl2-c,1.266 ghz is better for superpi 1m.
-
Uhm...you have a incredible optimization of s.o.,but i think you must 2 volt vcore for time around 60s.
good luck man,we will see this winter
-
Gigio,you are a bad man the most important wr of socket 370 are in italy and will remain in italy.
TERRARAPTOR,do you have vcore mod in your tusl2-c?The vcore is low for a world record...
-
very strong! Now I understand that I had to prepare some backups - this one would be really hard to beat.
But...maybe also gigio have more backup
-
wowowowowow,the king of coppermine.
Now,is time of ln2
-
Very nice score,it is the wr of all thoroughbred.
For the vdimm do you have a mod or a ocz booster?
-
Ok, did now some Mods to my NF7:D Much better now, tested now all on Air
Nf7-s have problems with cpu 100 mhz fsb.
Your score(240mhz)is good,ma a good nf7-s is rock solid ad 250mhz of fsb stock cooling and without mod.
Now play with the alpha timings,not only the timings of bios.
Do you have a link with the volt mod of chipset?Send my a pvt...and try another time the thunderbird
-
With nforce2 there is not luck
Try the l12 mod with bios mantarays xt 26 cpc on...the native cpu fsb 100 crash around 219mhz in nf7-s.
Gigioracing - Pentium 3 1.266Ghz S @ 1978MHz - 1min 3sec 31ms SuperPi - 1M
in Result Discussions
Posted · Edited by ruggero
dear friend,
how old are you? ;-)
Gigio is a "very bad man" only because don't share with info the name or the setup of his ram?
A very bad man is a man who kills children,women.
I have spoken with gigio often and in my opinion he is very helpful and i'm not in his team,but he is so helpful i'm so grateful.
I see you ask at me,griff,christian ney and gigio the chip of ram,you never use words "please" or "thanks".
For example,I asked two things at terraraptor and I used at the end of pm "thanks a lot"...
So,may be gigio don't want share with you his fantastic segret(lol),but...if you are the same gradus of xtremesystems,I can say the same of you:5 years ago I ask you one thing and the reponse is similar at "this is my business",do you remember?I still saved the pm ;-)
In my opinion overclock is only a hobby,I overclock for see the limits of my hardware,not for beet the results of a "obnoxious man"...
Life is not only overclock,I think you're tired and stressed for all test of sdram and you say things you do not want to say...
...take a break, take a bottle of vodka and a beautiful Russian woman...relax and take it easy. ;-)
PS:if the beautiful woman have a sister,i'm single