OdrzutoweWrotki
-
Posts
22 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by OdrzutoweWrotki
-
-
Tell me.How You score with that VOLTAGE ? + 0.25 mV ? You even do not need H2o cooling for that.
We really need Your help
-
i agree with Ryba, rather get 780 and be happy with 1400mhz
you can use nvidia inspector to go to 1.5v on your titan if you want, but it will kill your card for sure
Problem is that I use Nvidia Inscpector and with Enginering Bios (XOC) even if I will push the pedal to the metal means Voltage Throttle MAX right,I noticed on sensors only 1.212 V.
Not more
-
Thanks rsnubje
Encounter 2 limits :
1.Voltage : 1.2
2.Temperature : 78 C.
without hardware modification is somehow possible to pass it ?
-
Bios succesfully flashed Thank You Guys
So if I will set in Nvidia Inspector : Priority Temperature to do not exceed 90 C ?
I will be safe ?
i know stoopid question
-
Thanks a lot.
Trying to upload.
On the BIOS of SLV7 my Titan was at temp. level MAX 83C.And Fans Power : MAX 70 %
What do You think ?
What is maximum allowed temperature to do not burn our babies ?
-
nvflash --index=0 -4 -5 -6 GK110XOC.ROM
2 last questions :
1.Command -4 is not listed on NVFLASH command list.I got only -5 and -6.Why ? Do I have some old NvFlash ?
2.--index=0 ? You mean that it will point correct PCI port and card located in 2nd port ? Titan is located in 2nd port and has nr 1.That's why I always use command
nvflash -i1 romname.rom.
So as I understand it shall be --index=1 ? in my case.
-
Use -4 -5 -6 in the command. Should cover everything
Can You give me full line command pls ?
for example :
Nvflash -i1 GK110XOC.rom (with Your -4 -5 -6 : where to put it?)
(i have to use -i1 because i've got Titan in 2nd PCI port,0 is for rescue card).
so it shall look :
nvflash -i1 -4 -5 -6 GK110XOC.rom
?
-
I cannot upload this ENG.BIOS to my Asus/message : WARNING : Firmware image PCI Subsystem ID <10DE.8451.
does not match adapter PCI Subsystem ID <1043.8451>.
ERROR : PCI Subsystem ID mismatch.
-
Sorry Guys.
I have problem with this BIOS.
I've got ASUS GTX Titan and cannot flash it with NVFlash.
I've got message :
WARNING : Firmware image PCI Subsystem ID <10DE.8451.
does not match adapter PCI Subsystem ID <1043.8451>.
ERROR : PCI Subsystem ID mismatch.
____________
So what I have to do to flash it ? Some special command in NVFLASH to push to flashing ?
-
Last question : Can You somehow send me BIOS which You used.Because this one which I found on net...
http://forum.hwbot.org/archive/index.php/t-71489.html
I cannot flash it.
What Iam doing wrong ?
-
You explain me that exactly post above.This SHI**Y GPUZ LYING.
Now my Titan is in service because I upload wrong BIOS,but when I receive it again i will try You enginering BIOS.
Its allowed for ASUS ? or just for all Titans and I do not have to worry about uploading him ?
-
Just kidding DUDE.
Tell me.What t... is with that GPU-Z that he showed uncorrect readings.
F.E.My sets are higher than Yours,but its not true.
As we can see You scored higher.
It depends of what ?
-
-
-
Congratulations
I see enginering bios 80.10.2C.00.00
Tell me.This bios is only for EVGA or I can use it at my ASUS ?
-
Haloooo Halooo pomoc potrzebna !
-
Hi Why You turned Off 2 cores ? It helps to OVC ?
-
Can You give me any other infos about Bios Settings ? For example : Memory CLK etc ?
Nvidia GeForce GTX Titan Hardware Voltage Modifications - GPU OV, GPU OCP, MEM OV, Coldslow/shutdown and measurement
in Nvidia GPU Overclocking
Posted
You mean with the tool like it ?
BTW.OK.Even if sensors are lying,i set Voltage Throttle to the max,and receive always 82 Celcius score even if Temperature Priorioty is set OFF.
So.... I give up