Nvidia GPU Overclocking
The other green team goes here!
154 topics in this forum
-
Does anyone have a photo of the RTX PRO 6000 PCB?
-
- 0 replies
- 475 views
-
-
would there be anyone interest about a vbios viewer/vbios modifier for blackwell ,flashing restrictions can be skipped with either a .efi shell or something else, ill figure it out later.
-
- 0 replies
- 558 views
- 1 follower
-
-
Hi all! Yeah, so basically, how many times were these cards used on competitions, how many were made in total? What I heard is there were 200 made, at least 50 dead, and used on MOA 2014 and I remember I even asked Trouffman earlier this year on an "I forgot which" live stream, prolly MOA 2016, where they were used again with some silly little TFII/Gaming coolers?? Where did all the samples left alive go to? Is it allowed to sell/buy these cards and if yes, anyone knows where/how I could get hold of one working (could buy 2 dead, too high risk to try and repair those)? Any info is welcome, chime in everybody.
-
- 9 replies
- 3.6k views
- 3 followers
-
-
Hi there :-) i am selecting some GTX780 for SLI fun. Have some questions about that. What range should the ASIC be? 68 - 70 Someone told me 69 will be perfect. If i have a card with a good ASIC, is it nessessary to pretest the cards? Or is the ASIC 100% decisive? For example, have a 780 Lightning ASCI 63,9 Core offset +400 with stock cooler is limit at 1,06volt in all 4 gpu-pi what is more meaningful? thx for help
-
- 1 reply
- 988 views
- 1 follower
-
-
Question for everyone on Windows 10/11 and a working Quad SLI. Did you have to use any special tricks to get Quad SLI working? Dual and triple work, But as soon as i install the Quad bridge, I only have access to 2-way SLI, and the other two GPUs aren't loaded in 3DMark. I've already tried different drivers under Windows 10. And now I've installed Windows 11 and tried the latest driver.
-
- 0 replies
- 806 views
-
-
This is the pre-4090 xoc data I have,I inquired with Galax, these can be posted here. Tip: use tool need setup vc_x86 first Download link (Regarding the cards after 2080ti, it involves RMA and cannot be announced.) About other cards pre-2080ti,You can ask me by PM。
-
-
- 11 replies
- 4.1k views
-
-
keep playing with my older EVGA GPU's and Xdevs is the wholy grail of information. Now it shows Server Error (500). did they kill it or part of the Nvidia divorce. Sad if its gone....
-
- 2 replies
- 1.8k views
-
-
Anyone knows if there is any modded-hacked driver (from 496.13 and after) for Windows10 , with GTX 680 support ? I want it for gaming purpose.
-
-
- 2 replies
- 9.1k views
-
-
I am looking to purchase, borrow, trade, or give one of my teenagers for 2 3090 ln2 pots, I have contacted Vince, Performance Pc, etc. everyone is out of stock, any help would be greatly appreciated. OG10kTech
-
- 2 replies
- 1.8k views
-
-
In the Steve vs Jay evga stream (20 nov 2020) kingpin mentioned an old nvidia utility called "smash clocks" which should let you see some internal clocks. I can't seem to find it anywhere does anyone know how to find it or if i simply got the name wrong? also is it useful?
-
-
- 6 replies
- 3.2k views
-
-
Hi Guys, I need a XOC bios for the GTX 780 CLASSIFIED, I tried looking for those of Skyn3t but unfortunately they are all dead links. If anyone has it, could you send it to me? Thanks in Advance
-
-
- 6 replies
- 2k views
-
-
Introduction After few months from the launch day of reference GTX 980 TI graphic cards Asus refreshed their top high-end line and finally introduced Republic of Gamers (ROG) top model. After very strong gaming - Strix series (as you might remember I had some great fun with 4-Way Asus GTX 980 TI Strix cards breaking few World Records) I was expecting a really mature construction and I have to admit I am not disappointed! Testing platforms: i7 6700K ES/i7 5960X Asus Maximus VIII Extreme/Rampage V Extreme 2x4 GB G.skill TridentZ 3733/4x4 GB HyperX 3200C16 HyperX 240 SSD Kingpin Fat TEK 6.66 & EK-SF3D Critical Point EVO Couple of Seasonic P1200 Plati…
-
-
- 205 replies
- 64.9k views
- 8 followers
-
-
I want to try to flash a bios on my 3080 (GIGABYTE GeForce RTX 3080 GAMING OC 12G (GV-N3080GAMING OC-12GD)) Since it's my first experience I want to ask wether anyone has tried to flash bios from different brands than the board used in order to get the power limit from 360W to 450W. So if you have any advice or experience for this mod any help would be appreciated
-
- 3 replies
- 2k views
-
-
long story short: tired of my desktop that consumed almost 1 kw every time I turned it on, I decided to try one of those latest generation mini PCs. Knowing that they are re-engineered laptops motherboard, I was looking for a compromise between performance and consumption. so about a year ago i bought this Mini PC ( AceMagic M2A StarShip - https://acemagic.eu/products/m2a-minipc ). I was honestly very satisfied with the performance and especially with the consumption in fairly heavy gaming situations: Rust, FC 25 mostly. the only flaw of this pc is that unfortunately the GPU ID has been customized. ( leaving aside the fact that even on the official…
-
- 5 replies
- 2.1k views
-
-
Does this exist? What do I have to do to get it? I just want to know if it exists or do I have shunt mod my Astral? Thanks! Marco
-
- 0 replies
- 1.2k views
-
-
May as well make a permanent thread incase anyone else needs to know in the future.... 480 Lightning dip switches... Can someone post what position does what? 3-4 on? And what are the PWM increments?
-
- 1 reply
- 3.3k views
-
-
Anyone use the 280 gtx VDD and/or the VDDQ mods for this card? Not sure what they are or what they control. What would safe voltage be for these on DICE? Any insight would be helpful.
-
-
- 9 replies
- 4.6k views
- 1 follower
-
-
I have GIGABYTE GTX 1650 GDDR6 Rev. 2.0 gpu and I want to adjust power limit. Does anyone knows if it's possible and if it is, how to do that
-
- 0 replies
- 1.4k views
-
-
Introduction Finally 1080 TI custom PCB cards are out! This time I would like to focus on Asus Strix Gaming 1080 TI card. This guide applies also for POSEIDON card cause they use same PCB. Still 1080 TI chip is pretty new for vendors, and there is no super top highend LN2 card as Matrix yet, but looks like Strix is doing really well. Though we have to remember that in product ranges it's just "low rank" custom design which is supposed to be just better than reference card. It's not designed for XOC in first place, though it doesn't mean it can't be overclocked Testing platforms: i7 6950X @ 4.5 GHz Rampage V Edition 10 4x8 GB …
-
-
- 51 replies
- 58.9k views
- 6 followers
-
-
https://hwbot.org/submission/5100171_1497486
-
- 1 reply
- 1.5k views
-
-
Hi, I am looking for bios mod, tool and EVBOT Firmware for GTX 680 Classified. Do any of you have them? Thanks in advance
-
- 0 replies
- 1.6k views
-
-
What is the performance boost I can get from pushing my card to the limit. My dad is https://xender.vip/ https://xender.vip/https://xender.vip/ convinced that it’s not worth it because i would get only a 3% boost for 5 years off of my graphics cards lifespan. Help appreciated. https://nox.tips/
-
- 0 replies
- 2.1k views
-
-
So I finally got a 560 ti modded for both core and mem, cap mods, delided, and on an aio and before running any benchmarks I raised memory voltage above 1.7 volts (I don't know exactly what it hit) and had immediate shutoff followed by artifacting and inability to get into windows outside of safe mode. The Elpida datasheets suggests that the gddr5 should tolerate 2v. Its possible that I passed this point but i'm thinking that its more likely the memory controller. At least I already had ordered another 560ti (hopefully without elpida this time). I'm hoping that somene with more experience with this can shed some light on safe memory voltages for fermi cards. I'l…
-
- 2 replies
- 1.8k views
- 1 follower
-
-
Introduction The newest Asus graphic card Republic of Gamers GTX 980 Matrix Platinum is designed to be extremely overclocked. Considering the fact that Asus GTX 980 Strix is an amazing card on LN2 my expectations were pretty high! Test platform Intel i7 5960X @ cooled by 8ECC Fusion 3.1 Asus Rampage V Extreme Asus GTX 980 Matrix Platinum @ cooled by EK-SF3D Critical Point EVO 4x4 GB Kingston HyperX 3333C17 Hynix single - sided MFR 120 GB Kingston HyperX 3K 2x Galax 1200W HOF PSU with removed OCP Thermal paste used - Gelid GC Extreme for both CPU and GPU Big thx to all vendors who support me in this project: Intel, Asus, Kingston HyperX, 8ECC, E…
-
- 26 replies
- 12.2k views
- 3 followers
-
-
For those interested in overclocking , volt mods and Bios Flashing on the new nvidia ampere graphics cards rtx 3080 and rtx 3090 there is good news , finally there is already a new nvflash 5.660 that works in Ampere. People are reporting on cross flashing Asus Strix Bios 480w working on some cards RTX 3090 and have raise the power limit with it getting better stability and higher overclocks. Elmor's evc2 works in most cards for voltage control ? . Please post your overclocks /share your Bios , volt mods , cooling solutions , tips and tricks on this new nvidia Ampere graphics cards. Share the knowledge ! ** Do it at your own risk ** *Update - nvflash 5.660 stan…
-
-
- 8 replies
- 30.5k views
- 1 follower
-