John_Hexane

This is a very sad loss for the entire overclocker community 😥

There are not enough temperature measurements, perhaps you passed the test in the refrigerator

Hi, please add the motherboard NoName X79_V2.72A Were produced under the brands Machinist, Kllisre and Alzenit, also found under the name Alzenit X79M-CE3. In my case, the manufacturer is not specified on the board, so choose the one you like) The chipset is C602, I attach a photo Valid: https://valid.x86.fr/46wvre

Hello! Please, add ASUS Z8PE-D12/EMBEDDED https://valid.x86.fr/gah0ag (The information in CPU-Z is incorrect, the BIOS from Z8PE-D12X is flashed) Proof:

Hello! Please, add ASRock M3N78D in AM3 motherboards. https://valid.x86.fr/ttis5q

Of course wPrime)

Hello, please add GA-M61SME-S2 (rev 2.X) https://valid.x86.fr/hkqz1n

I have a board with ECC REG DDR2)

Hello, is it possible to use dual-processor configurations at this stage? https://hwbot.org/competition/HWBOT TEAM CUP 2021 - INTEL/stage/5294_pcmark10_express_-_ddr2

Hello, please add the Wibtek H61-MX2 motherboard https://valid.x86.fr/02exxp

I always do this

Hi! How did you manage to overclock the bus on the G2? Did you use SetFSB or something similar? Or is it a hardware mod?

On this board, an attempt to fix the PCI-E frequency results in a hang on POST code 04. So I just left it on "Auto". In this mode, after ~265MHz, perhaps a little later, problems with the video card begin, but as you can see, this did not particularly bother me)

Hello, thank you for adding past boards! Please have another one MSI 661FM3-V aka MS-7103, Socket 775, Chipset 661FX: https://valid.x86.fr/4yyxyb

E6550 despite the BSEL Mod on the same 800 MHz-did not work, the board stopped at POST-code 04.