munternet

A friend with the 0088 bios has different settings than me but also is having the bios freezing when trying to access Q-fan (F6) in the bios so it seems it is a thing. All he changed was boot>csm> PCI-E>UEFI and that was enough to cause it. He got the bios from me so I'm wondering if it's on my end? I might re-download and try again.

Problem solved Thanks for your help, I appreciate the effort, it kind of led me in the right direction Turns out something in the CPU portion of my overclock was causing the problem I started with minimal settings and it worked fine. Changed to the old overclock and another freeze. There is a setting there somewhere with a conflict but I'm not sure which one but it's working fine without it.

You can't control the fans with the T-sensor on some of the headers. Only the signal pins are used on the board. They are daisy chained and monitor only one of the fan's RPMs. The power is supplied direct from the PSU https://www.ekwb.com/shop/ek-cable-splitter-4-fan-pwm-extended Cheers

Thanks for the reply I'm using D5 PWM pump controlled off the CPU fan header with molex main power and EK 4 way splitter cables all daisy chained off the #2 case fan header with their own power sources running 7x PWM Furious Varder EK 140mm fans. All fans are controlled by the 10k thermistor (T-sensor) from the main coolant res. 32GB G.Skill (2*8GB) with only a single M.2 samsung 970 EVO Plus 1TB. No DIMM2 riser so a pretty basic setup really. I might clear the cmos again and manually input all the settings and see what happens

Have been using the 0088 bios for M12A and it has been going very well but when I try to use the fan control in the bios it freezes and I need to press the retry button. Is there a newer bios or a way to get around this? The only thing working for me is setting the fans up first then applying the overclock and if I need to make adjustments clr cmos, make changes and reapply the overclock