Jump to content
HWBOT Community Forums

5erveD

Members
 View Profile  See their activity

  • Posts

    559

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Posts posted by 5erveD

    GIGABYTE Z690 Tachyon

    in Alder Lake (Z690) & Raptor Lake (Z790) OC

    Posted · Edited by 5erveD

    36 minutes ago, spit051261 said:

    I will try a ks tomorrow .

    ?

    Thank you, but no need anymore.

    @sergmann

    @BOBKOC

     

    Well F..... me running!

    I got it working. Not sure what actually did the trick. I switched the biosses a couple of times, flashed known good bios on them and then just flashed the x4b in the bios. 

    I am able to alter settings now. Tried a known faulty setting so I had to re-enter the bios again and it worked. No screens freezing. Used limp button as wel. Works.

    It beats me but I ain't complaining (yet)

    Finally able to do some tuning. 

    Already able to boot higher mem frequency with my mediocre mem kit.

     

    Much abliged for the suggestions and thinking with me to overcome the obstacle. ?

     

     

    GIGABYTE Z690 Tachyon

    in Alder Lake (Z690) & Raptor Lake (Z790) OC

    Posted

    23 minutes ago, BOBKOC said:

    fpt have you tried?

    No, not yet.
    It was such nice weather that I actually went outside :P
    Will give it a go.

     

    4 hours ago, sergmann said:

    Flash same bios like your first one to b-bios, save you profiles from main bios to usb und upload it to backup bios. It should works without any problems. After it you can try main bios Chip,  but I’m not sure if it will works better.

    how is the position of your bios switches? Have you selected single bios or dual bios?

    Yes, I am not sure either if that will work. Just thinking about and trying solutions.
    Yes, running dual bios. Had g7400 ran on the other one and profiles.

    Will give this a  go now.

    Thanks for you help, Gents!
    Will let you know if it works or not.

    GIGABYTE Z690 Tachyon

    in Alder Lake (Z690) & Raptor Lake (Z790) OC

    Posted

    9 hours ago, sergmann said:

    You know LIMP button? If something don`t work, press LIMP button and you should be able to start with default settings without cmos ;)

    I haven`t tested this bios with KS, only a few times with 13900k/kf and 12900k.

    you can try my profiles, they are here in thread but I`ll upload it also on the first page.

    with 12900k I was able to start 7200 without any problems my m-die profile, for A-Die it was 7600

    Yes.

    Limp has no influence.

    I just cannot get into the bios not matter what. I get the same clear CMOS screen over and over and it freezes when trying to click the ok button so it goes into bios. When not present del for the bios I can go into windows no problem.

    Thank you for your profiles but i cannot even select them so no joy.

    The only way to get out of this impasse is by flashing a older bios via Q-flash again and the flash new bios. But then same story. 

    The only thing I got left to try is the other bios chip. I used the B chip for this and left the A chip untouched so I still had my profiles. Maybe the second bios chip is a fault or something. I don't think so but you never now untill you try. 

    Will try in a few moments 

    GIGABYTE Z690 Tachyon

    in Alder Lake (Z690) & Raptor Lake (Z790) OC

    Posted · Edited by 5erveD

    @sergmann  @BOBKOC

     

    Let me try your suggested ideas. Will get back to in a few moments.

     

    Edit;

    Flashed a older bios, select default and updated the bios inside the bios.

    All good! The able to go into the bios and alter the settings but after using settings which will not boot and I clear CMOS it will boot up again but still hangs again at the bios is reset screen. I can use mouse to press the ok button but then it hangs.

    No way to get into the bios again except flashing again trough Q-flash.

    Kinda a PITA when trying to tune mem ?

     

    Edit 2:

    Even after flashing again with the same bios x4b it gets stuck at the bios reset/clear CMOS screen and freezes.

     

    Will revert back to a known good bios for now. Hoping you are able to help out on this later.

     

    Cheers!

     

     

     

    GIGABYTE Z690 Tachyon

    in Alder Lake (Z690) & Raptor Lake (Z790) OC

    Posted · Edited by 5erveD
    Add screen

    Trying to update the bios to x4b.

    But keep getting stuck on the; bios is reset screen. Cannot use the keyboard or mouse then.

    I can boot to windows, NP,  but not able to enter bios. Ps2 or usb keyboard doesn't make a difference. Both unresponsive.

    Clear CMOS does not help either.

    Tried flashing to the official bios F20 and using Q flash after that with renamed bios file. Both x4b with or without avx, keep giving me the same problem.

    It seems I cannot enter the bios with the x4b whatsoever.

    Using a 12900ks.  No raptors yet. 

     

    16670587040671412629182044139039.jpg

×
×
  • Create New...