T0lsty
-
Posts
225 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by T0lsty
-
-
why nobody used thuban for wprime1024 ?
zzolio, Cische- - why so high clocks in 03 and so low in vantage ?
-
congratulations for all winners !
-
its 90 minutes to the end) i`ll go to setup ivy .. for 03)
-
Wonder how you get that RAM frequency... Very nice job!!
on higher gpu clocks ram cant go 1300 ..
ref card can do 1300 much easier
-
Great score! Saved the ref card for backup scores? ;-)
no, that card died yesterday .. I lost vrm temp control and it burned ..
-
this is PE card. I lost some performance ar pci-e 8x ..
-
i was looking at contest time(
-
All stages and contests end at 2013-07-31 20:00:00 GMT+0.
I noticed one contest had it wrong - fixed that now.
you`ve just stolen 4 hours of benching)))
-
cant submit 3dmark 03
have an error :
Oops. Something went wrong.
We could blame this on you but it`s most likely our crappy coding skills. You could try again or nudge our developpers for fixing this.
-
cpu is maxed out, but it was enought for last year moa qual)
http://www.hwbot.org/submission/2292219_t0lsty_3dmark03_radeon_hd_7970_214000_marks
I`ve already reinstalled win xp and will try it tonight. i hate last day benching .. but this time i will..
-
yep 999MHz in 3D
its impossible 150k on 999MHZ )
-
i think 999 bug was only in win7 ? i know about it.
score grows from 1000 to 1400 . but not so good. now i remember that i have same bug on 260 gtx card but with 197.45 driver. I think my win xp is bugged ..
card goes 1400 3dmark 11 with 320.49 driver).
-
-
1.4 V for ref board is too much))
i hope only mosfets burned .. cause i dont want to buy one more piece of 5h1t
card didnt survive.. gpu is dead.
ordered a new one.
-
Untested potential CB/CBB mod for 560Ti-448 TF3/PE:
tnx a lot . mod works good.
-
yes, old one. many caps, short thick wires , tested few times last month (before EPOWER ruse was announced) but droop was very big .. more bigger than on 260gtx , with similar soldering.
so at -60 there was a little difference between stock VRM and epower (1300/1330)
-
I have droop from 1.6 to 1.4V ((
-
nice work.
what is VGPU idle/load ?
i had a big vdroop with epower..
-
Seriously T0lsty, why such a negative tone all the time?
It's starting to piss me off.
this year moa pissed off many people ..
This stuff is not provided officially by MSI, I've pushed them to find solutions to the cold issues because people asked me for it and instead of just giving it to them personally I posted it here so it'd be as fair as possible for the competition. Would you rather prefer that nothing was released?
if msi officislly didnt provide bios before start of the semi-final, I`d prefer not to have it at all.
-
If someone can confirm CBB mod is needed for the TF3 card I'll ask for it.
msi decided to have real fun this year with participants ?? its only one week to the end of comp..
-
no I don't.
but as i remember card just shut down at -60 (with no voltages). - so need a cb mod .
with epower - i have a cold slow issue at -60 .
-
i didnt use heatsink on vrm. only fan cooling
-
1.4 V for ref board is too much))
i hope only mosfets burned .. cause i dont want to buy one more piece of 5h1t
-
tnx for bios .. but also need cb/cbb mod .
The official MSI MOA 2013 "Class B" Worldwide Online Semi-Final thread.
in HWBOT Competitions
Posted
my PE card cant go 1400 mhz .. but both ref cards can easy do 1400 .. was no time for playing with cards .. i burned 2 ref cards .. and i didnt use more than 1,45V .. ln on mosfets i use only today ..