Chiller
-
Posts
737 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Chiller
-
-
that's a good point acctually
-
will not work mosie, you need with 2 cpu's in mobo also with each cpu to put mem in.
will not work when you have 2 cpu's and only on side of 1 cpu mem modules.
When i mean 6mem modules, i mean in the red slots with each cpu in bank 1, 3 and 5.
As for the downclocking, i mean when you are running two cpu's, and put ALL mem banks full (all 12 slots), the IMC is limiting factor.
don't think with 48gb of ram you will be able of running it at 2000Mhz if you have corsair dominator GT 2000Mhz.
-
With/without NUMA in every possible combination I could think of
I have X5677, with this cpu it was the same. Yes I know. It is starange, somewhere I read all dimms populated memory should run only 800. Maybe bios display something wrong but all other information tools confirm it.when you supply ALL slots of mem, you're mem will be downclocked.
therefore it's best you only populate 6slots if you whant to run it high.
Has to do with limitation of IMC
-
did you try it with NUMA option changed?
it's under power management options in bios.
-
nice score,
try again to get GT1 test better.
-
i had the 4x 4Gb and 6x 4Gb in my rig and worked just fine.
but because of timings i did go back now to 6x 2Gb, sharper timings.
I think is more user defined with settings you use in bios...
-
Soldering iron works well on many sample without any brands restriction
-->[ ]good and short answer
-
Update :
Seems that USB3 problems (BSOD) is of the track, used all night usb3 in all kind of situations and don't get any BSOD anymore, hope other users can confirm that ?
-
Low gap option is also in bios, but doesn't help in any way you set it
-
normally yes,
NUMA option is about sharing the mem for both cpu, or dedicated mem for each cpu.
stranbge that numa disabling doesn't work with a dual gpu vga in mobo
-
i sended it to Evga this question :
High Prio :
QPI slow mode,
Memory controller mode (NUMA options),
Peripheral stuff - PCI-E ports Priority,
Enable/Disable APIC,
Possible to disable NUMA with dual GPU vga in the system,
Possibility to run a out-of-shop raid ssd PciE (look at revodrive's).
Low prio :
"Hit del message display" and "Wait for "F1" if Error".
-
i thought so to, he means pics of benching rig then ?
-
The pictures requirement only applies to the Enthusiast League. All scores receive points and all scores contribute to the team. Even if you did not attach pictures.
I hope a screenshot is still needed for verification of score ?
-
-
Here for the SR-2 users a new bios version with the C1E option added,
and some better Bclock OC.
C1E option is under Cpu settings.
Flash methode included for windows 32b/64b and DOS.
Have fun with it.
When encounter faults, problems or any other not normal thing, just let me know, i pas it on
-
Bclock? FSB you mean.....
-
because now there are bigger sponsors behind hwbot.
-
If I'm not mistaken, CPUz will not get globals anymore... but Reference clock, for example, yes.
So, to be coherent, if CPUz won't get globals, reference clock would not get them too because if the reason behind is "Cedar Mills can obviously run higher than Wolfdales", then the same thinking could be applied to Reference clock: getting 600fsb on a 965/p35/p45/x48 is easy, it's harder to get 255 BCLK on X58 but no points here because 600>>>>>255.
Did I mess up something?
You are correct and therefore this hwbot version and rev4 is not good.
the old version was much better.
-
don't like it.
-
Nice one kiki, keep puching that rig, try setfsb or clockgen.
-
that be better for shure
-
We need subscores to find bugged runs, cheats, etc... it's just like that, not all details shown , score CAN be removed ( indeed indicating it can be ahum tolerated)
Calm down now, hopefully we can drink some brewskis at that big OC event in the Netherlands in August...
Chiller chill !!
drink some LN2 Johani'm always chill, bloodpressure never goes higher then 2/4
-
is not bad this benchmark.
think that the results are good in order to what cpu and OC you use.
Not much bugs in it or none at all.
-
Benchmark settings is not a minor mistake i believe.
(example : run benchmark on lower resolution or other settings, when benchmark finished,
then hide benchmark settings before making screenshot with an other screen over it to get some more hw or global points with a higher score.
For that just show benchmark settings)
Maybe the Subscores not visible can be a minor mistake when the score is not suspicious.
Difficult ? No i don't think so, so why keep discussing about it?
Rules are there for a reason.
Even to know that you check the BOX when you submit a score that you agree to the rules but even never take the time to read them!
Hwbot Crew will check reported scores and check or block the scores in question when they are not suspicious.
Something important to note, I had to solve very old reports and I must say that these are no longer subject to moderation.
Besides in the years (2008- - 2009) screens was not mandatory in Wprime (only validation)
Thank you very much, for understanding
Sw
I told him that of the scores he reported of me, was something before his time on hwbot.
now he knows
and i understand, but just telling them that they read the rules before submission, so there screenshots are ok, and nobody has a reason to report them, and then there no problem.
I had 1 score that Rsnubje reported, and he was right about it.
Gpuz was not in the screenshot and therefore not posted by the rules , result : i deleted it.
and i'm not making any fuzz about it, because he's right about that score,
he need to see it to that when a score of him is not correct, it can get reported.
That's it.
have all greta benching times. chilly
The REV4 public test server! (feedback welcome)
in HWBOT Rev.4
Posted
i don't think that's a good idea, everybody is good in something,
the other in CpuZ OC,
the other one in 3D.
And limitation in number of submissions for a benchmark is something you can't do, because if somebody has like 100 cpu's or Vga's ??
So he can't submit anymore ?
I think you can forget that