trodas Posted July 19, 2014 Posted July 19, 2014 Todays I made a bench using UCbench 2011 on my MSI P55A-GD55 mainboard: http://hwbot.org/submission/2586398_ The MSI P55A-GD55 is correctly entered and one can see that the manboard type is properly recognized in the test. However the submission does NOT show up on the MSI P55A-GD55 page! http://hwbot.org/hardware/motherboard/p55a_gd55/ See? Not one single UCbench 2011 score! WTF!!! :mad: (not again!) Quote
CL3P20 Posted July 19, 2014 Posted July 19, 2014 your score was likely removed because it is invalid.. *look at the password checked column and the time column... they should steadily increase from top to bottom... If you have a larger # somewhere in the middle of your result table, using the same SSE instruction set.. your score is a bug run. Quote
trodas Posted July 19, 2014 Author Posted July 19, 2014 Well, there is no hint that the score is removed, so it should/have to be in the maninbord. Period. As far, as the Pwds./sec go, they do steadily increase well w/o any exception. The Pwds. checked and Time have a two slight differences: 6456 6432 and 6744 6644 ...but as long, as there is no error, then why it should be a bug run? I could provide the log file from this run. Still it much more looks to me as the Cinebench FAILURE of HWbot I expericend there: http://forum.hwbot.org/showthread.php?t=94442&page=4 Same stuff. Good test and it does NOT show up in the mainboard page - Cinebench test: http://hwbot.org/submission/2479951_trodas_cinebench_r11.5_core_duo_t2350_0.88_points (note correctly reported 30BB mainboard!) ...and it does NOT show up on the 30BB mainboard page tests: http://hwbot.org/hardware/motherboard/30bb/ Quote
trodas Posted July 24, 2014 Author Posted July 24, 2014 Hooray, it get fixed, thanks! UCbench score is now visible under the mainboard on what the test was made Hoooray! Even the long, long awaited 30BB score (Cinebench) is there now, and 4th place, hmmm, not bad! Thanks a lot for the fix! Hope never more these fails come... Quote
GENiEBEN Posted July 25, 2014 Posted July 25, 2014 Bad luck brian, score had to be removed as it is bugged (the A<B<C rule). Quote
trodas Posted July 25, 2014 Author Posted July 25, 2014 Noproblemo, I try it again, hopefully this time it will go well The important thing is, that it will be recognized as MSI P55A-GD55 score, that matters. UCbench is problematic Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.