GtiJason Posted January 3, 2016 Posted January 3, 2016 (edited) ISSUE SOLVED BY REINSTALLING EVERYTHING ONCE AGAIN PLEASE CLOSE TY HWBot for the space On Z97 platform I just installed a new xp, but the eram doesn't change to look like an ic or show z drive in my computer, so i cant drag my toeram folder inside, never had this problem before. Feel free to move if this is in the wrong Forum....Any advice. Used Barbonet's method like I always do and tried several times Control Panel -> Add Hardware -> Next SI -> Next Choose the Add New Hardware -> Next Choose the Installation Manual -> Next Show all periferiche-- > Next Disk Driver -> look for the driver in the D: \ Eram220 \ 2000 \ eram2000.inf Next Next. Set the following in Control Panel -> Eram Disk size 100 000 External Click Modify and then OK you will be asked to ravviare ..... say NO for now! Now go to the folder d: \ Eram220, and click on the file 2x format_auto_eram.bat Click Ok and ravviate! Installation and Configuration finished;) http://www.hwlegend.com/bbforum/viewtopic.php?f=219&t=7907&sid=a05625555507f1aca49ffd3dda3420bc Edited January 4, 2016 by GtiJason
GtiJason Posted January 4, 2016 Author Posted January 4, 2016 Just scrapped 2 hours of work, reformatted new SSD and restarted from scratch. Problem is now solved, not sure how or why but it is. PLEASE CLOSE, TY HWBot for the space
Recommended Posts