...lol, nice frequency! My do 5.8 on single stage -38 load. What temp do you have with Cascade ? Is delid yours ?

hwb prime is not an good reference to see potetial of your cooling , try an cinebench R11.5 or R15 , i use anyway wrong JRE here ,so my chip are fully stable this bench at 6300 same volts on my cascade unit! 6 ghz easy cache ! , yes delided.. that was only an pretest before LN2 .

...is not delid. 5.8 is 3D stable, but i should try Cinebench! I hope with Cascade do almost 6.1/6.2 3D stable...

slighty 3D prehaps, that mean 2k1 , 2k3 , 2k5 and aqua ...for sure not vantage or 2k6 , 3dm2011 ...depens alot of cooling, they are very hot cpu ..at 1.65 is disaster ...because they use 2x layer of TIM , DELTA T is huge!,also how your cascade can hold his internal load temps( not evap load that you see on thermometer - between that and internal temps you calculated your DELTA) , mine for 3D already tryed and stable at 6450mhz .. you need to give a try and you will know for sure what chip/cooling can do!

Edited January 15, 20179 yr by nachtfalke

...yes, your advise is true bro ! I should try to know how my cpu can do. Light 3D over 6.2 GHZ is good if CASCADE can cooler the cpu ! Are you happy of your M8H ? With mem over 1820 CL12 i have issues, but i haven't try last bios yet

Hero board is not what we need. Cpu and Cache OC is good ,but mem OC disaster...got Code 55/49 all time. No 1t possible here...need upgrade before ln2 on this chip.

 

Gesendet von meinem SM-G930F mit Tapatalk

...i have the same issues @ 1800+. With latest bios no issues @ 1800 CL12-17-17-28-1T for me, but higher 55 error code as you. For 3d perhaps it's enought, but for 2D as XTU no.