Can someone Help for pl and fsb strap

[Zamin]

P5e64 ws evo 

1.4 v core,1.57nbv,fsb1.36,1.2 SB,2.1v dram volt(due to not good stick),dram static,dynamic control disabled,6,7,6,20,5,72,10,5 if i don't mistake 200pl5 500fsb 1n,2000mhz ram work (superpi32m past),i try to dual ram it doesn't post. I lowered to 777 i try high NB voltage  it doesn't work. Can someone help?

 

 

 

[Zamin]

I found something which don't put videocard to 1th slot it affect very lot. put GPU to last pcie slot .it reduces stress on NB i think.

[TerraRaptor]

Set dynamic write enable first.

[Zamin]

How can I improve pl lvl because 1 slot i can do pl 5 but dual pl6 not stable superpi32m ?btw my best ram c8-8-8 2000 -67620 2.1v(single ram) i little struggle with ram that's why when I put 2 slot ram i set 8-8-8 when i change 1 timing it doesn't post what can I do?

[TerraRaptor]

you likely need to adjust dram skews for dual channel. Try changing CLK skews - advance +350ps for chA (a2) and normal/-25/-50/-75/-100ps delay for chB (b2) (needs pricise adjustment). Also, may be low voltage issue for NB with 2 channels active - what vnb you use?

[Zamin]

Single 1.57 i don't remember maybe it can go low 200pl7 1.61 or 1.63 NB i think

[Zamin]

Superpi32m stable

 

[Zamin]

Pl6 32m stable with delay not stable i get stable 75 advance for B2

But i can't pl5

[TerraRaptor]

You need cl6 elpida hypers to run pl5 with strap200

[Zamin]

It not related my Mobo Which i can't do pl5?

 

[Zamin]

Btw mem settin 8-8-8-24

[TerraRaptor]

8 hours ago, Zamin said:

It not related my Mobo Which i can't do pl5?

https://www.anandtech.com/show/2427

 

[CL3P20]

You also need a lot of MCHv if you want to run PL5 or higher with high speed/tight timings..  1.6+ MCHv or cold is likely required.

[Zamin]

Maybe I need to remove heatsink. I tried with hair dryer but I can't remove .