Jump to content
HWBOT Community Forums

Recommended Posts

Posted

Quick explanations for anyone that would like to attempt the mod.

Keywords : Strix B550i B550-I voltmod vmod vdimm ram memory voltage

The memory pwm controller is located on the top right of the board and is a TPS543B20 (datasheet attached)

image.png?ex=672f2391&is=672dd211&hm=1e3183950ff3c8cfa013405d791d29fde59a2c9640f38acdd94dba1243c19290&

tps543b20.pdf

The pin we are looking for is Pin #1 (RSP), its stock resistance to GND should be around 3kΩ. You need to solder a variable resistor between this pin and GND. This resistor nearby is connected to Pin #1 and that's where I soldered my wire.

image.png?ex=672f2391&is=672dd211&hm=f9e795cac4d43da72186c2e9612058456b2b8291829b11c5e08a9134fbc9327f&

From this to GND through a potentiometer, pretty simple (I used 100kΩ that's all I had). I'd recommend adding a switch in line with it to easily disable the mod but didn't do it myself.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...