Christian Ney Posted August 21, 2011 Posted August 21, 2011 (edited) SUMA Platinum GeForce4 Ti 4200 SE 128 MB Overclocking / Volt Mod and Benchmark Here is the card: Preparing the card for the Single Stage: Volt Mod: Regulator for the Memory is the SC1175CSW: Pin18 (-IN1)(act like FB) to (GND) : 94.7 Ohms as R1 Pin16 (-CL1) to (-IN1) : 94.3 Ohms as R2 vRef = 1.25v vOUT= vRef x ( 1 + R2 / R1 ) Regulator for the Graphic Core is the SC1102CS: Pin11 (Sense) to Pin14 (GND) : 104.8 Ohms as R1 Pin11 (Sense) to (+) of the condensator : 31.7 Ohms as R2 vRef = 1.265v vOUT= vRef x ( 1 + R2 / R1 ) Sold a 1K VR to both regulators like on the pics bellow: Voltage Measure points: Measured: Stock: vGPU 1.648v vMem 2.5v vtt 1.2v After mod: vGPU: 2.04v vMem: 2.79v vtt: 1.33v (careful vtt is linked to vMem, do not raise vMem too much) More pics: Edited August 21, 2011 by Christian Ney Quote
Christian Ney Posted August 21, 2011 Author Posted August 21, 2011 (edited) 3DM99: http://www.hwbot.org/submission/2200743 3DM00: http://www.hwbot.org/submission/2200744 3DM01: http://www.hwbot.org/submission/2200751 3DM03: http://www.hwbot.org/submission/2200740 AM3: http://www.hwbot.org/submission/2200742 AM2: Impossible to bench due to D3DERR_OUTOFVIDEOMEMORY Edited August 21, 2011 by Christian Ney Quote
Christian Ney Posted August 21, 2011 Author Posted August 21, 2011 (edited) Edited August 21, 2011 by Christian Ney Quote
Christian Ney Posted August 21, 2011 Author Posted August 21, 2011 My only tweak for 3DMark 2001 SE Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.