nachtfalke Posted August 31, 2011 Posted August 31, 2011 I have same motherboard and have big problems with RAM,can you tell me what version of bios do use? what kind of RAM and what settings? danke! Quote
Mafio Posted September 1, 2011 Posted September 1, 2011 hi nachtfalke, i'm with bios A118 cause with A119 and A120 i've trouble running with 2133 memory multiplier. the RAM i'm using here is a set of g.skill ripjawx 2133 8-9-8 (p.n. F3-17000CL8D-4GBXMD) with Elpida MNH-E-Hyper. [b][color="Red"]MAIN[/color][/b] BCLK - 10902 CPU multiplier - 30x Vdroop - without vdrop PLL voltage override - enabled EVGA ELEET ratio control - disabled VCORE - 1610 VDIMM - 1980 VDMM DQ Vref - auto VCCIO - 1.08 PCH voltage - 1.10 CPU PLL - 1.8 PWM Frequency - 500 [b][color="Red"]MEMORY SETTINGS[/color][/b] Memory multiplier tCL - 7 tRCD - 8 tRP - 7 tRAS - 22 tRRD - 4 tWR - 10 tRTP - 5 tWTR - 6 tRFC - 72 IO latency - auto RTL ch1 - auto RTL ch2 - auto Command Rate - auto // auto = 1t [b][color="Red"]CPU SETTINGS[/color][/b] # active cores - 2 Limit CPUID maximum - disabled Execute disable bit - disabled Hardware prefetcher - enabled Adjacent cache line prefetch - enabled Hyper threading - disabled Virtualization technology - disabled Power Technology - disabled EIST - disabled Turbo mode - enabled C1E - disabled C3 report - disabled C6 report - disabled Package C state limit - disabled VCCIO at 1.08 volt seems the swet spot, with more i've instability and over 1.12 volt the mobo doesn't even post. kinda strange because the same CPU on gigabutt have no problem running with VCCIO at 1.2+ volt. PCH voltage is fine at stock up to 107.8 MHz of BCLK, then it need 2 or 3 notch high to gain a bit of stability. hope that this will help you. p.s. nice avatar Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.