Jump to content
HWBOT Community Forums

*kenny* - Phenom II X4 960T BE @ 4947.1MHz - 14min 24sec 562ms SuperPi 32m


Recommended Posts

If you want to try this one again, then try up to 1.7v vcore, and disable 2 cores because you can hit higher CPU-NB frequency with 2 cores on Zosma/Thuban :) Also, not sure why it says single channel, but if your reapers are rated between 1.7-1.9v, don't be afraid to give them 1.9-1.95v. That's about all the CPU will take. If you have any more questions on tweaking times and such I'm sure the guys at OCF will take care of you :)

Link to comment
Share on other sites

It's actually running at 1.7v vcore ! For some reason cpuz is reporting low,and I dont know why but I can't get as good a clock on the memory when running 2cores :shrug: I can't remember what voltage I was putting through the ram but no doubt it was a fair amount , thanks for your tips.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...