BeepBeep2 Posted June 21, 2012 Posted June 21, 2012 If you want to try this one again, then try up to 1.7v vcore, and disable 2 cores because you can hit higher CPU-NB frequency with 2 cores on Zosma/Thuban Also, not sure why it says single channel, but if your reapers are rated between 1.7-1.9v, don't be afraid to give them 1.9-1.95v. That's about all the CPU will take. If you have any more questions on tweaking times and such I'm sure the guys at OCF will take care of you Quote
*kenny* Posted June 21, 2012 Posted June 21, 2012 It's actually running at 1.7v vcore ! For some reason cpuz is reporting low,and I dont know why but I can't get as good a clock on the memory when running 2cores :shrug: I can't remember what voltage I was putting through the ram but no doubt it was a fair amount , thanks for your tips. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.