Marcusgamer Posted February 22, 2013 Share Posted February 22, 2013 Hello everyone I'm new on HWBOT Forum, and I have a small question: I have a 7870 HAWK, and would make a overclock it! In the midst of so many topics found this: http://hwbot.org/forum/showthread.php?t=45721 "GOD" Massman wrote much about the VGA, and hit 1400MHz on Core with approximately 1.4 V. However, I can not define more than 1.35 V in MSI Afterburner, even using LN2 BIOS. How do I do? Note: The BIOS Massman used an OCP for HAWK: http://downloads.hwbot.org/downloads/VGABIOS/7870hawkovp.sb However, the BIOS is not the format. ROM, so I can not perform the BIOS FLASH! How do I use a BIOS. Sb? Thankful. Sorry for bad english, I'm from Brazil! Quote Link to comment Share on other sites More sharing options...
Massman Posted February 25, 2013 Share Posted February 25, 2013 To go over the 1.35V voltage limit, you need to use the Afterburner Extreme. As for the bios, just renaming .sb into .rom should work. Quote Link to comment Share on other sites More sharing options...
Guest Stay Puft Posted February 27, 2013 Share Posted February 27, 2013 Hello everyoneI'm new on HWBOT Forum, and I have a small question: I have a 7870 HAWK, and would make a overclock it! In the midst of so many topics found this: http://hwbot.org/forum/showthread.php?t=45721 "GOD" Massman wrote much about the VGA, and hit 1400MHz on Core with approximately 1.4 V. However, I can not define more than 1.35 V in MSI Afterburner, even using LN2 BIOS. How do I do? Note: The BIOS Massman used an OCP for HAWK: http://downloads.hwbot.org/downloads/VGABIOS/7870hawkovp.sb However, the BIOS is not the format. ROM, so I can not perform the BIOS FLASH! How do I use a BIOS. Sb? Thankful. Sorry for bad english, I'm from Brazil! Just rename it .rom and flash it. Also you need to contact MSI for Xtreme afterburner. I definitely need it because im at my vcore wall Quote Link to comment Share on other sites More sharing options...
[ xzero ] Posted February 28, 2013 Share Posted February 28, 2013 (edited) ERROR 0FL01 here...from DOS. FIX>from desktop, using atiwinflash...works. Now need the killer afterburner unlocked... Edited February 28, 2013 by [ xzero ] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.