zzolio
-
Posts
460 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by zzolio
-
-
In Denmark the shops will ban you if you bin a lot of CPUs this way but a few is not an issue
-
it's probably my fault
just ordered four more yesterday
-
I have forgot about that
I will try making one this weekend
If I forget again just pm me onto I get it done
-
No one is saying you have to bench lighting cards
Just bench a 5870 ref and use abx1.5 xtrem can set 1.6v and abx 1.5 can be found easy with Google
-
I Will make a mod guide for you to Day if i have time
-
Flight and hotel has been booked
-
-
why do you get so many points for the Gskill cup?
-
they never expire but are not sure that all competitions from 2012 should be counted
but the problem is probably that it has not Update the point jet
-
it may be some of your old Competition points do not count because they are too old
-
there are only 2 I bought Nanok's cpu several years ago when I started to bench
nanok has found a new cpu but is not tested jet
-
yes you just need to screw some more on the VR
-
mods test on ln2 and are working fine
-
Time to test....
I hope that some of the moa participants will test their cards now that I've made some easier mods
-
nice chip Dancop I hope it likes ln2
-
-
take high-resolution pictures of the controllers for Vgpu and Vmem and a large picture of both sides of the pcb without heatsinks
-
-
MSI GTX 980 Gaming 4GB (non reference PCB)
all mods are test on air and ln2 and are working
Vgpu mod
OCP mod
Vmem mod
Vpll mod
Cold slow mod
power limiting mod
With this Vgpu mod you can use bios from all manufacturers
Keep an eye on Vmem voltage if you change the bios. With some bios the memory only get 1.4V. The card can run with it but can't overclock much.
If you use a bios that provides 1.4V then the memory gets 1.6V when you are in the bios so be careful when modifying the Vmem voltage if not using MSI bios
To new overclocks remember to change the resistance on the Variable resistor until there is maximum resistance between the two pins you are using
-
vmod guide is going to be ready today I hope
-
-
Yes but i don't have time befor monday
-
-
I think the secret has to do with home cpu's, the moa ES always seems to burn us, and the PSU's might have too little watts at moa
I think the problem was that the pot was mounted too tight at MOA
but last year there was something strange
Subzero for 24/7 anyone?
in Offtopic
Posted
I have a friend that do use ss for a gaming system