Matt26LFC
-
Posts
1048 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Matt26LFC
-
-
Absolute monster! Great work
-
Amazing run! Great work
-
-
-
Amazing battle! Great runs from both of you!
-
Amazing battle! Great runs from both of you!
-
Nice runs! Great work beating some of mads runs
-
1
-
-
Yeah was hoping for better, this chip should have clocked a bit higher than my other score too. Not that it can compete with Luumi's new 3570K anyway, so need to bin a ton more now anyway haha
-
-
23 hours ago, Mikecdm said:
my x99 champion came with a second mounting mechanism that had through holes. The rods for vince's pots fit no problem with that.
Checked my box had no such mounting mechanism
-
On 11/15/2023 at 2:06 PM, bigblock990 said:
The backplate on lga2011/2066 is M4x0.7 threads which is the same as the mounting rods elmor uses. Vince uses 6-32 rods. Did you check if the larger m4 rods will fit in the Trex top? There might be enough clearance, I'm not at home so can't check/measure myself.
If you want you can modify the backplate to fit the 6-32 rods, and it will still work with M4 mounting for a waterblock ect. I did this to three mobos without issue. Remove the ILM/backplate. Drill the holes out with a 3.55mm drill, then chase the threads with M4x0.7 tap. Reinstall the ILM/backplate. The 6-32 rods will pass through, and standard m4 mounting posts still work. Just be careful with the m4 stuff as the threads are pretty shallow (weakened). Obviously do at your own risk, I assume no responsibility for any damage
Thanks for the advice, I may end up giving that ago ?
-
6 hours ago, unityofsaints said:
Ooofff regular Volcano on X99, sounds like a recipe for disaster? Even on 7950X it can struggle a bit in the heavier benches.
Yeah wanted to use my Trex but the rods didn't fit. The volcano rods are thicker and fit the socket.
Not sure what anyone else did on this board for mounting a pot
-
Nice work! Guess I'll be revisiting again haha Had similar problems last time I ran crashing on screenshot, quite annoying!
-
Amazing CPU! Great work, guess I'll have to get back to binning 3570K again lol
-
Amazing chip! Nice work
-
Congrats! Great score
-
Thanks, chip clocks well. Will try on y UD5 too however I found my 965 didn't clock as high on the giga board, but my 32m efficiency is better
-
Tried again on the Asus board. -90c and CB. Tried increasing PCIclk and running 1:4, made no diff unfortunately :(
-
Tbh I didn't know NB had CB. Figured it was just CPU. Will try again with some PCIe CLK, see if it helps. Was quite low, was getting CB at about -90c
-
-
-
Cheers its a fun platform. My 32m needs work though haha
-
Nice work on that card! Great scores today
-
rm3113 - Radeon HD 6870 @ 1300/1320MHz - 1272.21 DX11 Marks Unigine Heaven - Xtreme
in Result Discussions
Posted