Matt26LFC
-
Posts
1048 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Matt26LFC
-
-
Found a Radeon 5450 that works, so been using that, however still having problems with bclk. Trying 12100F now. Best I've gotten is 117Mhz bclk, however I have to drop the memory significantly to do so.
Running X3i BIOS and using 0x09
Tried different VDD/VDDQ from 1.25v up to 1.45v
Tried VDD2 CPU up to 1.45v
Tried VCCIN AUX 1.9v
Disabled Fast Boot in memory settings. Memory is on Auto timings.
VCCSA is on Auto
Do I have to maxmem for bclk OC?
Turned off C States and a couple other bits there
Anything specific I'm missing?
My memory is Corsair 6200Mhz C36-39-39 kit 32GB
-
Picked up a Tachyon and a G7400, does running the igpu hurt bclk overclocking? Most I've hit is 127MHz
-
Price drop to £180+Shipping
-
-
Bump
-
-
Cheers :) And yes Hypers
-
-
-
Cheers, I'll give it a try. Ground also let me know to try them :)
-
Great score! And thanks, been having a blast running X58 cold!
-
Nice run! Top work Drag
-
-
4 hours ago, Zamin said:
do you have batch numbers?
Nope. Not sure batch means much for Skylake, I've tried a few different ones and they all seem to clock very close to each other
I've got two more coming from eBay and both are also different batches. Hopefully I get lucky with one haha
-
On 8/10/2022 at 1:50 AM, unityofsaints said:
@Matt26LFCI bought this one years ago:
https://hwbot.org/submission/3737974_jordan_hyde99_superpi___32m_core_i7_6700k_4min_30sec_891msWould you consider that golden enough?
Hi, not really what I'm looking for thanks. Really wanting one that can do 6.6Ghz in R15 minimum
-
Bump
-
Hi, not really doing any GPU benching anymore so can let this go
Pot is insulated and comes with thermal probe, comes with original box too
Looking for £180+Shipping
-
2
-
-
1 hour ago, d0minat0r said:
well done! L310 batch?
Yes L310B batch
-
-
Bump
-
Bump
-
6 hours ago, eviledeath said:
I have a 6700K in my H24 but never tested its potential in OC, you never know.
Good luck!
My new one was crap about! 4.7 for 1.35v R15 ?
-
1 minute ago, Fasttrack said:
Folks, the best ever 6700k was resourced by Alex@ro and bought by me.
It was at the time of release of 7700k.
That cpu, non delidded did 5.2ghz with 1.325v on impact.
Took it up to 5.8ghz on Dice cbr15.
No delid.
Sold ages ago for a fraction of what I had paid.
Where I want it haha
-
45 minutes ago, suzuki said:
I can't remember a better one.
Yes this is the one I remember too. To be competitive will need the same, getting bored buying 6700K's trying to find one haha
Got another on the way atm maybe I'll get lucky this time.
GIGABYTE Z690 Tachyon
in Alder Lake (Z690) & Raptor Lake (Z790) OC
Posted · Edited by Matt26LFC
Cheers for the response
I've got a GT730 on the way so will try that too, will also try the 5450 in the top PCIE Slot.
The most I've booted is 120MHz on G7400 and I use GTL to increase in OS. Once I hit 129MHz it instantly freezes and then will sometimes bsod. Generally see IRQ not less or equal than, and memory management errors so I think you're right memory could be the issue.
I've had memory down quite low already, I found the lower the strap the more bclk I could get, like if I was at 4800Mhz and dropped down to 4000MHz I'd gain 1-2Mhz bclk
I'd like to try a G.Skill kit too but these memory kits are expensive
I'll try the 5450 in the top slot first and see what happens
EDIT
Tried your profile with a couple changes, I turned off LAN and Audio, also I set memory clock to 6200Mhz as opposed to 6800Mhz
Can't get past POST with the settings. I tried to increase VDD/VDDQ to 1.45v, but still wouldn't POST, the debug code ends at 54 then goes through the post cycle again and again and again. Is it possible this board just doesn't like the Corsair Vegeance sticks? Or is the board likely a problem, a bit like the early Asus boards where?