Andrix85

Great Gigio...

I have try two kit of memory on my UD4H that have PSC: F3-12800CL9D-4GBXL: Powerchip XFZ494A3G-A TRANSCEND TX1600KLU-4GK: Powechip With G.SKILL I can run CAS 8-13-11-36 @ 1185 mhz and CAS 9-13-11-36 @ 1280 mhz With Transcend I can run only CAS 8-13-11-36 @ 1185 mhz With higher frequency an timings i have problems, mboard error code 51.

Thanks bro...

Hy boys...I have solved partials my issues with the ram...I try an other kit of G.SKILL PC12800 CL9 4GBXL ( PSC with black pcb ) and i can run with 2400 divider up to 1260, 1270 mhz CAS 9-13-11-36 1T 1.675V. Not bad...

Thanks Pixy..

Purtroppo no Leo...Sono con dissi stock, ma la GPU con vocore default è stabile a max 716 mhz, x andare oltre bisogna dare volt...

Why you disable points Keroro ?..

Thanks Denis...

Strong result bro...

Hy boys... I have installed the new AquaMark3 version but when I click on the SAVE RESULT button, the benchmark doesn't create the file. Why? I use win xp...Thanks

Nice eun Moose... What ram do you use? PSC or BBSE ? Have you problem with Gigabyte ? Thanks

Great run Mat.. How is the temperature? If good try 1.6V..

Yes, I think that your temps are good, you ca push the voltage to 1.6V. Do you bench outside Mat ?

In my country Italy, for 20L with dewar rental are 57€

There are both theese problems: 1) I can't stabilise the ram at 2400MHz and 2) if i set 2400mhz, the board boots at 2200 mhz. I have try to ugrade bios, to set ASUS PSC timings but nothing. I'm stable only with 2200 mhz divider and to bclk 106.7 x 52 = 5650 mhz with ram to 1173 mhz CAS 8-13-13-36 1T.

Nothing Sin...I set 2400 dividers but when I enter to windows xp or 7 the ram are setting to 2200 dividers...I don't know...

Contrats bro... Good run...

I think this is a good card on air, with LN2 can do better...The WR frequency is around 1150 MHZ GPU, this can reach theese frequency I think.

Goog run bro...

Your frequency are to WR bro...Monster vga...You need an IVY BRIDGE cpu to do better.. Congrats !!!

Sin, i have resolve the problem...Are the system corrupt...I reinstall WIN XP then I try...

Happy to see you are come back... Great result

No error if I set 2200 dividers and ram CAS 8-13-13-36 1T

Hy Sin...I have tried other settings with my PSC ram and I can boot without error code 51 with 2400mhz dividers and ram cas 9-13-11-36 1T with IMC 1.25V and VCCIO 1.25V but when i start windows xp there is 0x00007b blue screen. Why ?

Hy, Has your AXERAM PSC chip ? Work fine with ASROCK Z77 EXTREME 6 ? Thanks