Andrix85

Probably is the ram the problem. Are they 100% compatible with the mboard? Have you try other timings as CAS 9, 10, 11 for frequencies higher 2133mhz? I don't think your 3570K has so bad IMC

The CPU run with memory in slot three e four, I don't think CPU is dameged. Can you tell me the process to do RMA? I'm in Italy. Thanks

If I do RMA, Intel would accept ?

Today I try another time with single module of ddr in every slot and the ram run only in third and fourth slot, black and red together = single channel. On slot one and two (black and red) i have 55 error code. I try with an other motherboard but I think is the memory controller at this time. What do you think ?

I saw the socket PINS and they are regular. The slot dimm are ok, I would like to clean the socket and the slot dimm contact.

Hi boys... I have a strange problem with my mboard or my cpu, I don't know what is the problem! I have use a 2600K for some benchs with ram in slot dual channel red with no problem but now when I start the system I have 55 error code with the ram in dual channel slot red. I have try the other slot black and nothing, error code 55. The system boot only in single channel mode. I try the same ram with a 3570K and the sistem start regular in dual channel mode slot red. What is the problem? It's 2600K ram controller died? Thanks

Nice Trevor...

TRANSCEND AXERAM DDR3 1600 MHZ CL8 @ 1.65V AIR COOLED

Nice Robi...

Thanks Vivi...It means that the cpu can do higher frequency, not only 5.7 GHZ. It's correct ? This is my first Ivy Bridge and the first time I have used LN2. I can do experience

I have tested the CPU only with basic bclk, max 101.3 as you can see. Should be that the CPU have no cold bug with higher bclk than 105 ?

Where do you reed EDO RAM ? it's an error yes

MSI Z77A GD65 or GIGABYTE GA-Z77X-UD5H

3570K Batch 3221B905 test with LN2 not good...Cold boot at -85° and cold bug at -120°. Can do 5.7GHZ 1.785V 4c/4th, but good memory controller, 1351MHZ CAS 11-12-12-30 1T with GEIL EVO CORSA 2400MHZ CL11 @ 1.65v

Nice work Mat...

3570K Batch 3221B905 I test tomorrow with LN2

At 5.5.GHZ i havn't benefit, only with memory frequency...i can test it if i can buy... Thanks Nachty!

If it can do 5.7GHZ with 1.65V in 3D bench is ok for me. Can you try? Or a 32MB SPI ? Now with the 2600K I can do all 3D BENCH @ 5.7 GHZ 1.65V under SS, but with 3DM VANTAGE I must set 5.6GHZ. Thanks a lot..;(

Ok, I remain with my 2600K @ 5.7 GHZ...

Hi Nachtfalke... I have found the same batch 3770K. Can you test it with Single Stage ? I want to know if it can do 5.7, 5.8 GHZ 4c 8t to change my 2600K that it has bad memory controller with Z77 chipset. Thanks Andrea

Hi Nanok... Can you test it with temperature around -40° ? I have found the same batch but I can use it with Single Stage and I would like to know if it can do 5.7, 5.8 GHZ 4c 8t. Thanks Andrea

3226C086 4600MHZ v.core default AIR COOLED...With SS where can I arrive ?

Hi boys, I would like to send my MSI Z77 GD65 to RMA to solve this fix multi and because it boot and don't boot sometimes, but I accidentally bent some PINs on the socket. I have arranged them; do you think MSI accept my RMA request ? This is the foto of the Socket: http://imageshack.us/photo/my-images/834/dsc0151w.jpg/ Thanks

Thanks Sam, I try as suggest you to me. I hope to resolve.

Hi boys, I have this new configuration and I have some problems with the stability of the ram GEIL ULTRA PLUS PC312800 1600MHZ CL 7-7-7-24 2X2GB KIT. The ram are certificated to run on MVG and I know that have POWERCHIP as the GEIL BLACK DRAGON. With Ivy Bridge I saw test at 2133 MHZ CL 7-10-7-27 1T @ 1.6125V and at 2240 MHZ CAS 8. How can I setting the RAM in to the bios ? There are too many parameters to setting. Thanks