04ahgy

Ahaaa, I see clearly, but what's the point if one do not submit for stage1. Then her/his freq cannot equal to anything. I do not want to induce persistent argument about this but still in my interpretation Stage2 submission cannot be valid without equal frequency Stage1 submission, but in the replaced case it can be valid. Eg. one member have valid CPU-Z but unsuccessful SP32M. So the member can submit Stage1 result, because it does not have to be equal to anything. But stage2 result cannot be equal to anything, if stage1 submission is not present. HGyu

I think, also the processors, but the rule says just frequency... But it is quite different to achieve same freq vith two different CPUs by just OCGenie. HGyu

That is not the One used to submit CPU-Z score, because it is not a CPU-Z score. It is a SuperPi score, for which CPU-Z window is obligatory. So in my interpretation, CPU-Z have to be on the screenshot according to the general SP32M rules, and this competition have EXTRA rules, due to the Stage1 and Stage2 submissions HAVE TO be linked, by the exactly same CPU frequency (in the normal few MHz oscillation interval, of course). The fact, same CPU frequency was used is proven by CPU-Z showing same MHz on the Stage1 and Stage2 submissions. @darkage: thanks.

Then what about the criteria written in Stage2 rules: "- Frequency must be the same as the one used to submit the CPU-Z score." It's just not the same.

@Massman: thanks for your help. @LapinouX: nice work at all, but (strictly regarding the rules) video lenght is out of the acceptable period. @yamahar1: your Stage2 submission is made with completely different CPU than the submission for Stage1. i7-860 vs. i5-680... According to the rules both of them cannot be valid. @LeGaL^CriMeR: stop crying around, it's a little bit boring. First fix your Stage2 video according to the screenshot. You didn't get that session at the same time the screenshot made (different allocated memory sizes on video and screenshot). If all your submissions are flawed to the end, then you can continue searching other people's submissions for errors.

@ Massman: I've made the submission, link: http://www.hwbot.org/community/submission/2159678_ Video to match: Many thanks for your efforts, Regards: HGyu

Hi all, Still unsuccessful my attempt submitting score for the second stage. I made screenshot, trying to help locating the source of the error. http://www.apaczai.elte.hu/~04ahgy/PH/2011-04-23/youtube_error.jpg The video is that can be seen in my profile, under videos tab. Automatically found by HWBOT engine. I tried to submit the short (youtu.be....), the long link (youtube.com/....), but alll tries was unsuccessful. Browser is FF4.0, Win7 x64 Ult, but still debian&FF3 and Mandriva&Conqueror does not work (same error). HGyu

Unfortunately the OCGenie calculated FSB was about the same, LN2 cooling did not differentiate the result.

Sorry to mention that, it seems you have some misunderstandings about the competition and the stages. At my submission into Stage1, you commented: "LeGaL^CriMeR: No results from Super PI!!! " Of course, not. That stage is about CPU-Z valid. Second stage is about SuperPi. There is no rule, mentioning that all of the two stages have to be submitten simultaneously.

Yes, it worked. The Stage 2 one not worked. The procedure was the same, OS linux kernel 2.6.26.1, debian etch, firefox 3.5. I will try it using some win machine later. @LeGaL^CriMeR: Please tell me the very exact details, what rules are violated. Lets focus on the first video, the only one (for just now) valid submission. Rules are: # The video must show the entire overclocking process, including: — power off - true. Can be clearly seen that CLRCMOS jumper had been shorted, system boots at default settings, claiming at the post screen: CMOS Settings wrong. Entering setup, disabling full srceern logo, saving. After booting, poweroff occurred via touch button. — pressing OC Genie button - clearly visible the pressing, and pressed button. — post (with displaying operating frequency!) - poweron via touch button, system waits for about a dozen of seconds, post occurs at OCGenie managed frequency. — boot in windows - The whole time visible. — clearly show official Wallpaper + CPU-Z tabs (CPU, mainboard and memory) - The whole time visible. — (for SuperPI-32M: clearly show first 5 loops and while CPU-Z CPU tab is open)- The whole time visible.

Hello! Having problems submitting for stage 2. Pressing submit button gives error message (all required fields are filled, double checked) competition limitation: your submission is incomplete Youtube video is required. ???en.exception_unkown.youtube.movie??? message appears near the youtube URL textbox. But I have a valid Youtube video, here: It seems that HWBOT engine does not like the URL for some reason. Please help me. HGyu

Waiting for my Youtube upload.

Nice cooling. A little bit mad, on the healthy side on this phrase. I see you also have something to do with the odd hole-distance in case of newer nV cards.

Okay, I know that. For some reason, on my exact XP, it does not detect either SLI nor CF configurations. Detects both GPUs, the multi-GPU configuration is active (can be seen from the results), but GPU-Z "thinks" it is disabled.

Okay, I know that. For some reason, on my exact XP, it does not detect either SLI nor CF configurations. Detects both GPUs, the multi-GPU configuration is active (can be seen from the results), but GPU-Z "thinks" it is disabled.

Nice. This IS the real score, others overtook you are cheating.

Sorry for physx, damn nv driver switched it on after reset. BIOS reflash, then no RAM bandwith limit. Made new submission.

Thanks for your kind answer.

HD5970 is single videocard, but not single GPU. The limitation is "- Use 1 videocard(s)." Can it be used?

Lol, 3 GPU... OMG.

Thaks for the appreciating. Altough the Mo-Ra 2 is a very good radiator, i had to forc its passive cooling by the ventilator. Phenom II 1055T and the 4850 at VGPU = 1,5V (1,2V stock) made a lot of heat. Passively the system went to 65C degrees and freezed. By that little help of the fan, it remained below 45C. HGyu

Yesterday I made 2 submissions. http://hwbot.org/community/submission/1003741_04ahgy_3dmark_vantage___performance_2x_radeon_hd_5850_24782_marks http://hwbot.org/community/submission/1003415_04ahgy_3dmark_vantage___performance_2x_radeon_hd_5850_13049_marks Both of them are quite delicate cases, because I use 2 VGA boards (HD5850 and HD5970), but 3 GPUs. The other thing is that, these 2 boards do not have the same parameters. At the submission page, I have chosen the 2x SLI/CF menu point, and at the details, I typed the parameters of the primary VGA, that has 1 GPU only. The other board is a dual GPU board. Did I cshoose the correct category? If not, can I edit the submission? Thanks, HGyu