nachtfalke
-
Posts
859 -
Joined
-
Days Won
8
Content Type
Profiles
Forums
Events
Blogs
Posts posted by nachtfalke
-
-
On 6/17/2019 at 4:47 PM, (PTP) ShmoeMo said:
Sorry for opening such an old thread but im a little confused. You say we have to pull a pin high to keep all phases running but which pin do we have to pull high? and to 3.3 volts im assuming?
pin 48 = +5VCC ( add +5vcc LDO to generate power supply for pwm)
pin 51 = EN -enable chip ( detect whether MOSFET driver power supply is ready)
pin 52 = VTT - enable input of the controller(this pin monitoring if any 12v voltage are presence in the pci-e slot to activated the chip)
pin 62 = PSI ( power state indicator input for load ) here should be always 3.3v to enable ALL power phase , if 3.3v missing will be activated ONLY one phase.
-
My Rex are weak than this board, p5e3 premium has an incredible imc compared with mine Rex
- 1
-
-
new one , bench yesterday hole day 8 x cpu´s :D and now i bench aswell....i have many scores to upload :D
-
9 hours ago, TAGG said:
Have no LN2 on hand, but cascade rebench is coming this weekend
i don´t waste ln2 for these chips ...no worth , i do my best on cascade ,many of them scalling very well near -118 how my cascade perform!
-
thanks.
batch# Q751A353
-
that bios is modded by me to pass CS , offcialy exist only gtx 580 SOC with CS bios .....but can be easy modded for gtx 570 soc aswell ...you find more infos in the CS hwbot thread , regards!
- 1
-
need ONLY hard vmem mod for this card
for vgpu you also can use hard mode ( if i remember corectly is an uP6208 pwm controller) , with FB at pin8 ...but you will enter deep into OCP/ovp protection and need to add VID mode to pass them , this i a bit complicated for you ... easy way is to use MadMatrix software witch is fully compatible from gtx285matrix with gtx275ligning ... tu use this need to run madmatrix.bat via administrator and change HEX value with voltage desired ...a DMM in real time monitoring voltage is highly recomanded , because some hex voltage value are different what you applied by soft and real one!
i can you help you wirh vmode for gddr if you provide me the pwm info!
- 1
-
-
-
-
10 and 13 -SOLD
available ONLY 4 , 5 and 9
4) 1x Palit 9600GT sonic 512mb - use samsung BJ1A - this card is one of the best implementation for extreme oc!
30 euro !
5) 1x MSI 9800gtx+ T2D512 OC - best reference card , come with Hynix N2C mem ic , with good MC they hint 1400MHZ ...right gpu for extreme
35 euros!
9) 1 x GTX 280 with accelero GTX pro cooler , so i brought it few years ago....
55 euros
-
Available 4 , 5 , 9 , 10 and 13
-
3 , 6 and 8 - SOLD
7 hours ago, Rand0mOC said:10+13 to Estonia? what price?
100 € shipped!
-
-
Shipping to Australia is very expensive....sorry!
Up
-
-
All sold.
Thread closed
Thanks hwbot for space
-
-
Make me offer....
-
-
up!
-
MVE Lab30 - SOLD!
thread closed!
thank you hwbot for the space!
-
[FS] Dominator 2000c8 and Kingston 2000c8 -hypers
in Sold
Posted
For sale some of my hypers that i don´t need them anymore!
1) 3x2gb Corsair Dominator 2000c8 ( s/n 10090555) - tested for 2000 7-7-6 1T spi32m at 1.68v bios , platform used x58 RE3
2) 2x2gb Corsair Dominator 2000c8 (s/n 10232685) - part of tri channel kit but ONLY 2 sticks are available - tested for 2000 7-7-6 1T spi32m at 1.65v bios , RE3
3) 2x2gb Kingston HyperX 2000c8 - part of tri channel kit ONLY 2 sticks are available - tested for 2000 7-7-6 1T spi32m at 1.65v bios , RE3
1) 75 euros
2) 60 euros
3) 60 euros
priced not included shipping , please PM for shipping cost .. payment via paypal as gift/friend or buyer cover fees / bank transfer .