Moose83

lol DJ

Hehe i dont have Ivy But wait for my answer with X58

But i dont see an Controller in your pics! Rules: Show an real pic of Setup, esspecially storage;) And how plug USB to Controller?

So i dont see an Raid card on your pic...explain your hdd storage scores!

Make an OCP Mod;) Sounds like overcurrent protection^^

Woot, Denis has an 7970^^ Seems my PCM05 Cups are in danger

Nice run:) Bad to hear that your CPU is dead:(

Mh, damn:( Is there an way like this for my card:)

Tryed many times;) I use atiflash -f -p 0 biosname.rom I will try with your atiflash again;) Same again, it wont work:(

We will see:) I have pcb vers 3 with pcie3 And ordered some 4GB sticks;)

Yes BIOS 2 works without Problems:) I tryed to delete all ATI drivers flash then the card and install drivers. Install no problem but After reboot same driver issue again.

http://www.gigabyte.com/products/product-page.aspx?pid=4102#ov Thats my card, same as your linked Card, only clocks are a bit differened;) The Bios increase the Volt a bit, not that much, but still in Afterburner 1,3V maximum. I use Win 7 with the newest driver 12.11. But my card cant boot with that bios, get ATI error on Bluescreen, also the bios is only 64kB, original is 128kB.

Vgpu i removed the resistor, but only tested with afterburner and it didnt work there, so hardmod is needed. Maybee the bios is for the superclocked? Tested some other Bioses from Techpowerup, all Bioses work, but superclock Bioses didnt work. I have the 1GHz Ocerclocked Version of this card. Can you ask Gigabyte for the other Bioses please

Shortly one time i was able to boot:) GPU-Z shows pcie 2.0, before 1.1, so seems like some parts work. But Win hasnt load the driver and gives an error. Clocks in bios are 1100/1500, maybee this is the problem.

Well i flashed the bios, but now i cant boot the card, get bluescreen with ati error

Nice work, but why is your 3D Pixel Shader so low? Should be 6600+ And on the pic i see an 5800, in screen 7970?

Nice work!

Yeah, good i have buyed PSC for 2 Weeks

I have the 1GHz Version of this card, does it work too? Pcb looks the same:)

And flashing your BIOS disable all protections?

Does afterburner allow to overvolt the card to 1,8V without the resistor? And only flash the BIOS does disable all protections?

Yeah its not so good for pcm05... better 1882ix with 4GB Cache

Wow i have this card, really thanks for sharing!

Sorry forget to delete;)

I like the grill with the snow