Frankenchrist

Anyone else having issues with CPUZ, Core temp etc not showing proper voltages? Am using a GB P67AUD5 MB with a 2600K chip. This chip is a screamer easily hitting 5.4+ on low volts. I am running 24/7 @ 4.15v with LL1 and PP enabled. When I boot into windows my voltage always reads 1.37v on core temp and 1.1v on CPUZ. The voltage never moves while running 8 threads of prime 95 but my temps are climbing to 68-75. I am running a dual 120 rad setup with deltas and a HK3.0 block so my temps should never go that high unless my voltage is climbing but I never see any change in volts in my monitoring programs. Any idea how to get this unstuck? I have swapped BIOS, loaded the new version of CPUZ for sandy bridge and nada. Am I missing a BIOS setting that allows this to change? It makes it hard to keep playing when you do not know where your voltages are. My V-Droop in BIOS is 1.378 when set to 1.415.

I purchased the UD5 MB as well along with a 2600k chip. I can get my chip up to 5.4 GHZ in BIOS but can not boot into windows with anything more than 4.4 GHZ. Of course with such low clocks this thing is running no more than 45c rock solid under burn. I am wondering if I am missing something in the BIOS settings since I just stepped up from a QX6850 running 4.2 GHZ under custom water. (The 2600k is already doubling every bench from the QX) I am not even getting 4.5 at any voltage. I am running 4.4 at 1.3.v easily atm. I am running the 6a BIOS ATM and have just gotten all of the new revisions today. I will have to give them a try. Hopefully I did not just get a weak chip.