-
Posts
984 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Events
Blogs
Posts posted by GRIFF
-
-
Symptoms preliminary to death: difficulty or inability to detect USB and HDD devices at startup.
-
Third case: - SB overheating from the card on. It normally warms up so much that you can't hold your finger over it.
-
Second case: -- heating, even minimal, of the SB from the card off, power supply connected to the 220V. It heats up because the internal circuit of the SB supplied with 5Vsb voltage has low or short resistance. Normally in this case the card does not switch on.
-
First case: - data lines of the usb ports or a usb port only in short or almost, normal resistance must be on the 1-10Mohm
-
since these boards have problems with SB (they fail without warning and reasons) I suggest putting a small heat sink on the SB too.
-
You solve this problem with 1mm copper plate between NB and heat think or use this board with custom NB cooler.
-
My best duron 900 made 1180mhz at 1.85V.
-
Strong CPU. You check this cpu at 1.85V?
-
-
Nice score and great motherboard. Modified bios?
-
-
Hi guys. Congratulations and thaks for all participants.
2 hours ago, TerraRaptor said:and A7N8X-E Deluxe (and probably NF7 - not yet modded) - again, no 3D from me.
SDR sdram only motherboard allowed))))
-
What a cpu. Great score.
-
Hello. Dò You sell Only DFI NF4 ultra D?
-
Excellent cpu. Congratulations.
-
Bravo. Go for first places at all benchmarks))))))))))
-
Great score. Go for the first place at all benchmarks)))))
-
Grande. Vai così))))))
-
-
Final results.
https://hwbot.org/submission/4148239_griff_cpu_frequency_celeron_566mhz_1328_mhz?recalculate=true
https://hwbot.org/submission/4149655_griff_memory_frequency_sdr_sdram_175.7_mhz/
https://hwbot.org/submission/4149659_griff_superpi___32m_celeron_566mhz_1h_23min_10sec_636ms
https://hwbot.org/submission/4143276_griff_pifast_celeron_566mhz_2min_49sec_650ms/
https://hwbot.org/submission/4149679_griff_3dmark2001_se_radeon_9100_6953_marks
-
Nice score. pity with this card you have no step 1mhz. if you want I can help you turn it into VH6-II
-
-
Video Only for first 3 result. Need 2-3 seconds before finish of the test.
-
IMPRESSIE AS ALWAYS. CONGRATULATIONS.
GRIFF - Rampage Extreme @ 700MHz - 700.02 MHz Reference Frequency
in Result Discussions
Posted
Yes. It called HUB.