GRIFF
-
Posts
984 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Events
Blogs
Posts posted by GRIFF
-
-
Nice frequency for stock voltage?
-
-
Intel chipset (fsb 150mhz): https://hwbot.org/submission/2561826_strunkenbold_superpi___32m_celeron_566mhz_1h_30min_13sec_54ms/
Via chipset (fsb 145mhz): https://hwbot.org/submission/4142481_griff_superpi___32m_celeron_566mhz_1h_28min_49sec_744ms/
-
-
Grande. Bravo. You did it!!!!
-
https://hwbot.org/submission/4142481_griff_superpi___32m_celeron_566mhz_1h_28min_49sec_744ms/
-
-
Yes. But I need more efficiency for the first.
-
No, is the /3 divider. /4 divider don't permit +33mhz of the sdr frequency.
-
For this time I'm tested only Asus Cuv4x-e and made 161mhz with SDR. Boot at 120mhz, the rest from windows. Vccio didn't help. For me need another volts on NB.
-
3 hours ago, TerraRaptor said:
but seems like I'm too used to TUSL2.
?
-
In any case nice score
-
Via Chipset support only 3 options -33mhz +0mhz and +33mhz. You need to see chipset possibilities, not pll.
-
On 4/18/2019 at 11:48 AM, d0minat0r said:
Well done! What temps on CPU PWM without heatsink?
-15 -25 on bios
-
1
-
-
Hi Terra. So, 138.82+33=172
-
Thank you guys. With this cpu on Cascade and NB on air I haven't tried. I will try in the coming days. Impression that I am limited by the CPU. In my opinion the lack of over 700 results due to the cost and rarity of these boards. I have 3 other non-functioning ones. Two of which have SB dead. Let's see how they will go up once they are repaired. I wanted to say thanks to Tapakah, he sold me this card because he didn't go over 600 of fsb. The problem was the lack of compound between the NB and the heat sink.
-
2
-
-
Another one of E8500 better than two previous. Cascade repaired 1 week ago and this is first verification with real load.
-
https://hwbot.org/submission/4132741_griff_reference_frequency_rampage_extreme_700.02_mhz
-
For stage 5 requirements is:
- * ONLY USE PROCESSORS USING SOCKET 370.
- * ONLY MAKE SUBMISSIONS WITH A RADEON 9100 VIDEOCARD.
- * ONLY USE PROCESSORS BASED ON THE COPPERMINE-128 CORE.
- * MUST USE AN INTEL CELERON "COPPERMINE" CPU WITH NATIVE 66MHZ FSB.
- * MUST USE A SOCKET 370 AND SLOT 1 (WITH ADAPTER) MOTHERBOARD WITH NON-INTEL CHIPSET.
- * PLEASE ATTACH A PICTURE OF YOUR OVERCLOCKING RIG.
-
For stage 1,2,3,4 requirements is:
- * ONLY USE PROCESSORS USING SOCKET 370.
- * ONLY USE PROCESSORS BASED ON THE COPPERMINE-128 CORE.
- * MUST USE AN INTEL CELERON "COPPERMINE" CPU WITH NATIVE 66MHZ FSB.
- * MUST USE A SOCKET 370 AND SLOT 1 (WITH ADAPTER) MOTHERBOARD WITH NON-INTEL CHIPSET.
- * PLEASE ATTACH A PICTURE OF YOUR OVERCLOCKING RIG.
-
1
-
-
23 minutes ago, TerraRaptor said:
Competition page needs fix. This was pifast sub.
I wrote to @GeorgeStorm in pvt
-
13 hours ago, TerraRaptor said:
Waiting it.
Tonight. ?
-
3 hours ago, TerraRaptor said:
will you take part in comp?
No for fairness. I will do the same bench in parallel to compare ourselves. So I don't feel out of it.
Mr.Scott - Radeon 9100 @ 311/281MHz - 6415 marks 3DMark2001 SE
in Result Discussions
Posted