GRIFF
-
Posts
984 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Events
Blogs
Posts posted by GRIFF
-
-
-
Nice chip but very bad motherboard.
-
FSB frequency limited by PLL. (200MHz max for this PLL)
Vcore=1.7V modified.
-
Yes Seby is your P3. I'll tell you a few secrets to get a similar result.
-
Thanks, but lacks a bit for the record.
-
-
1300Mhz supered )))
-
-
vCore not working for me on my TUSL2-C with RT9238
Can you send a photo of the finished work (at akgrif@gmail.com) in particular area RT9238 and photos of the multi-turn trimmer?
-
I'm not used cpucool in this submission, is the limit of bios options.
-
Eccellent job TerraRaptor!!!!!!!
-
4 mhz until the first backup of Christian Ney )))
-
Vcore=2.15V Vnb=2V Vmem=3.9V
-
Thanks! I have do the vcore mod with successful but he had too vdroop
Only VID mod does not have vdroop.
-
Dear friends, please keep in mind that CUSL/TUSL motherboards were shipped with different power controllers - RT9238 & ISL6524. So mods are a bit different for these controllers.
Nice work, Griff. It would be really nice if you also add photos with indication of v-points to measure voltage for each mod as well as indicate "safe" limits for each and every voltage (i.e. high Vmem of >3.8v is said to kill southbridge quickly).
Ok, important notes. Thanks.
-
Waiting for CUSL2 ^^
Pictures of the vmods in your TUSL2-C?
For Vnb and Vmem pictures in attached pdfs, for other voltmods i make pictures later.
-
Vcore=2.16V, Vnb=2V, Vmem=4.1V
-
14.04.2013 - convert to zip all files
19.01.2014 - add pictures of Vnb mod
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Voltmods Asus TUSL2-C ita_rus_eng
-
18.01.2014 - add simple vid mod
19.01.2014 - add Ultra-fast and simple mod for VDIMM TUSL2-C, CUSL2 & CUSL2-C.
04.06.2023 - add new link for photos
Voltmods Asus CUSL2, CUSL2-C ita_rus_eng
Voltmod Asus CUSL2 & CUSL2-C_Vmem.pdf
---------------------------------------------------------------------------------------------------------------------------------------------------------------
A very simple VID mod for Asus TUSL2, TUSL2-C, CUSL2, CUSL2-C with HIP6021 pwm controller
In this case the values of the voltages in the bios is another plus:
* 1.70V = 2.0V (although the datasheet says that must be 0)
* 1.75V = 2.1V
* 1.80V = 2.2V
* 1.85V = 2.3V
* 1.90V = 2.4V
* 1.95V = 2.5V
* 2.00V = 2.6V
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ultra-fast and simple mod for VDIMM TUSL2-C, CUSL2 & CUSL2-C.
Obtained with the measured real voltage equal to 3.85-3.9V depends on the motherboard and power supply.
Mode 'of use: *
1) Insert jumper between contacts 3 and 4 means set 3.6V *
2) start the system *
3) at any time after the first boot screen to enter the second jumper between pins 1 and 2 (as set for 3.4V) *
P.S. With two jumpers inserted at the same time the system will not start if the chipset voltage less than 1.95V, tried it on TUSL2 with VNB-C mod that lies above. *
With VNB = 2.05V the system also with VDIMM = 3.95V. *
END
-
This is a collection of voltmods for these legendary motherboards made by me.
-
1
-
-
For mod Vchipset write me on akgrif@gmail.com
-
GRANDE !!!!!!!!!!!!
-
Excellent result. Congratulations Gigioracing.
-
Vcore=2.1V ; Vdimm=3.75V ; Vchipset=2V
I am preparing the diagrams and photos for mod Vchipset, Vtt, Vagp, Vcore, Vdimm
GRIFF - P4S5A-DX+ @ 151.1MHz - 151.14 MHz Reference Clock
in Result Discussions
Posted
P4s5a will be added to database.