-
Posts
214 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Kotori
-
-
We need externalPLL thread)
and socket7 WRs need update.
P5A was unable to clock change in DDS2, i don't know what cause.
Iwill XA100plus was possible but board died before try max fsb.
-
What signals was necessary?
Sorry, I don't know meaning of the question, where? which?
So you soldered the output of DDS2 to the reference-clock-oscillator and it caused rising of PLL maximum frequency?
Yes, For example http://hwbot.org/submission/3010261_kotori_cpu_frequency_pentium_3_celeron_mobile_500mhz_766.42_mhz
PLL of this board ICS9248AF-61 maximum 100mhz
By the way K7pro fsb is max 119mhz without mod
Or could you explain what signals go where
From DDS2 output to Mother board PLL(X1)
-
Not TubroPll, use DDS2 kit(Direct Digital Synthesizer2) http://akizukidenshi.com/catalog/g/gK-04594/
Sine wave output-only, 1hz~16.7mhz, 16.7mhzz~33.4mhz, depends on the Crystal, Operation at dip switch, TubroPLL doesn't sell now.
-
used an external PLL, 751chipset is possible up to 150mhz(need mod) but maybe impossible in this board.
-
k6 cpus have coldbug?
I have 570, but cant boot 780 on SS. maybe LN2 helps.
My K6-3+ coldbug at -15℃
-
-
Very nice! congratulations new record!
-
Thanks, air cooled+3.8v io voltage.
P5A doesn't boot in particular multipler and FSB combination, even if it's lower than cpu 720mhz.(my K6-2+ limite at 720)
-
Yes can't boot but may be possible if use other boards.
-
Hello GraduS-san, this time set to 2.4v, my chip don't like more higher voltage
-
Thank you very much
-
Please add mobile pentium 3 600mhz
Thank you
-
Why AX59PRO is so good? I can buy one quiet cheap, but might be crashed.
Here: LINK
4th photo from the end.
Everyone use for FPM ram overclock, good or bad i do not know.
-
Congrats Nikolay-san!
I feel S370 and SDR is hottest now in the old hardware category.
-
Golden stick! congrats!
-
-
Nice run I.nfraR.ed-san!
-
I don't have that plan now.
-
-
Congrats! one after another good score from you.
-
Well done Team KATANA!!
-
Thanks, I.nfraR.ed-san and Strunkenbold-san, i will test use my MVP3 board it has 2M external cache.
-
@I.nfraR.ed-san: Yes tried XP but 2k little faster than xp in my set up, i chose 2k for only Aquamark2.1, this pifast run too slow, it's regardless of OS, I don't know what's wrong, and my SCSI card(very old) unstable in XP.
-
Thank you GraduS-san! 9200SE PCI(XIAi) but pci clock changed in bios.
max1024 - Pentium Pro 180MHz @ 257MHz - 6min 22sec 0ms SuperPi - 1M
in Result Discussions
Posted
Nice!