[Slot A db fixes]

I've checked my slot A sub, and it had been appropriately modified, thank you Strunkenbold-san!

[fastvedub - DDR2 SDRAM - 750 MHz Memory Clock]

Excuse me mohammad2284, your this sub also using 3:5 ratio.

http://hwbot.org/submission/2651491_mohammad2284_memory_clock_ddr2_sdram_748.4_mhz

[Hideo - GeForce GTX 980 Ti @ 1800/1900MHz - 267167 marks 3DMark03]

Great work Hideo-san!

[kotori - K6-2+ 550MHz @ 700MHz - 3min 51sec 33ms SuperPi - 1M]

Thanks GraduS-san! yes i tried 150fsb but didn't boot, only saw a blank screen.

[kotori - K6-2+ 550MHz @ 700MHz - 3min 51sec 33ms SuperPi - 1M]

Thank you frag_san! when on board cache enabled fsb max 120mhz, disabled 140mhz.

[Socket 4/5/7 Hall of Fame]

Everyone like AX59PRO, I don't have any

 

About pi 1m, I did not upload video because it's terrible blur

https://www.youtube.com/watch?v=vYxeMx-ENzo

[TerraRaptor - Pentium 3 800Mhz EB s370 @ 1314MHz - 1min 24sec 31ms SuperPi - 1M]

Nikolay-san I agree to Stermy-san's remark,information sharing is the personal freedom, and I thought you've said unnecessary word.

Please end quarrel,I respected both and s370 familiar.

[TerraRaptor - Pentium 3 800Mhz EB s370 @ 1314MHz - 1min 24sec 31ms SuperPi - 1M]

Wow, sdr 219! Congrats Nikolay-san!

[Mr.Scott - Athlon XP-M 2800+ @ 2400MHz - 39sec 469ms SuperPi - 1M]

Well done Scotty!

[nickolp1974 - Rampage Extreme @ 675MHz - 675 MHz Reference Clock]

Nice!!

[kotori - SDR SDRAM @ 225.6MHz - 225.6 MHz Memory Clock]

Thanks ludek-san!

[kotori - SDR SDRAM @ 225.6MHz - 225.6 MHz Memory Clock]

Yes Gigioracing-san, I tried 3.3~3.8v, 3.3v or 3.4v was the best for this ram.

[kotori - SDR SDRAM @ 225.6MHz - 225.6 MHz Memory Clock]

Thanks TerraRaptor-san! this time RAM voltage 3.3V

[macsbeach98 - Athlon XP-M 2800+ @ 2400MHz - 39sec 515ms SuperPi - 1M]

Nice Pete-san!

[kotori - GeForce 6800 GT AGP @ 460/650MHz - 14308 marks 3DMark2001 SE]

Me too, I have both but ST6E broken. BTW, Antinomy-san do you have how many motherboard?

[kotori - GeForce 6800 GT AGP @ 460/650MHz - 14308 marks 3DMark2001 SE]

Yes, ST6E-RAID(Casper),there is no smell(aroma)

 

[kotori - SH6 @ 199.4MHz - 199.4 MHz Reference Clock]

Gigioracing-san, TASOS-san, thank you! SH6 is slower than BF6 at the same clock, but nice board.

Scotty, Paco-san, I did, thaks our great leaders!

Stermy-san, I'm using slot1 cpu, please don't worry about your little misunderstanding, it happens to anyone.

[Strunkenbold - Pentium 3 1.4Ghz S @ 2311.9MHz - 2311.88 mhz CPU Frequency]

Ok, thanks!

[Strunkenbold - Pentium 3 1.4Ghz S @ 2311.9MHz - 2311.88 mhz CPU Frequency]

Nice! add photo? double inductor mod interesting to me, it have any effect on the stability or clock?

[kotori - Pentium 3 1.4Ghz S @ 1858MHz - 57min 53sec 94ms SuperPi - 32M]

Thank you Strunkenbold-san, TerraRaptor-san! we need more better RAM.

TerraRaptor-san: I know you're faster than me, i'm looking forward to your good results(not irony) good luck!

[ObscureParadox - Xeon L3014 @ 5670MHz - 3158.46 pps HWBOT Prime]

Nice!!

[stummerwinter - Athlon 64 3700+ San Diego @ 2800MHz - 28sec 328ms SuperPi - 1M]

Nice run! Congratulations.

[Please add mother board]

trodas-san you funny, perhaps photo session has been carried out in the bus, and then.. man became a camera phobia.

 

If we continue to chat here, we becomes obstacle to work support staff.

Thank you cooperation.

[Please add mother board]

I don't have a better image.

This chip prefer lower temperature and sensitive to temp, more high voltage was working against.

trodas-san, your celeron looks good!

[Mr.Scott - BE6-II @ 175.4MHz - 175.4 MHz Reference Clock]

Nice Scotty! and that's a good CPU