-
Posts
547 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by phobosq
-
-
Today I need to make some room at home, I have way too many mobos which need to find a new owner.
- DFI DK P45 T3RSB - full box, quite rare mobo from DFI with P45 and DDR3. I did not push it quite hard, made around 580 FSB with my mediocre E8500. Not tested on cold, air only.
- DFI LP NF4 SLI-DR Expert - full box, tested on air/water/SS, pre-insulated with eraser (I may remove it on buyer's demand).
- DFI LP NF4 Ultra-D - mobo only, tested on air/water/SS, cooler on the chipset changed.
- DFI NF2 Ultra Infinity - mobo only, spent last few years in the closet, was working, but some caps need replacement before putting it back into action. It is capable of doing FSB 250 without mods.
- Mushkin Ascent XP3-12800 - 2x1 GB kit, on D9JNM, default 7-7-6-18 @1.85-1.9. I bought them for 775/1366, but didn't use them apart from checking default settings.
Prices (without shipping):
- 70 euro, sold, shipped
- 50 euro, sold, shipped
- 30 euro, sold, shipped
- 20 euro, sold, shipped
- 30 euro
All items are fully working unless said otherwise and are sold as seen on pictures. I provide no warranty and I accept no returns because I am private seller.
I am from Poland, so I prefer an EU trade to avoid issues with shipping and customs - shipping costs will be between 5 and 15 euro depending on item size and destination (to be agreed with buyer). Payment via PayPal only.
PM me if interested.
- DFI DK P45 T3RSB - full box, quite rare mobo from DFI with P45 and DDR3. I did not push it quite hard, made around 580 FSB with my mediocre E8500. Not tested on cold, air only.
-
I've got the same, since 3 days I get notification that I gained new achievements of 75 cups and medals, but on My Achievements it still shows 70/75 (and I have 81).
-
Looking good, time for LN2 action on the mems.
-
@Infrared - I suspect IMC, I played last weekend with San Diego 4000+ that clocked well (suicide above 3200 air/3500 SS), but was a poor mem clocker, was able to boot 2x256 Corsairs 3200C2 @280 and even run 1M, but did 265 stable @3.6 and no voltage bump improved stable OC. It also couldn't run 2x512 above 260 and I have 2 tested kits that are able of that; also after freezing the CPU could barely hold mems @250. Time to swap CPUs, I guess.
Waiting for someone to pull 311 0-2-2-1.5 and break 28 secs.
-
Nice dare to share some details about mems used - what brand is it, what voltage it required etc?
-
Check the dates; 13 April 2016 - 15 July 2015
It'll probably be available soon, no worries
-
bring out your backups/sandbags lol
-
I spent whole evening yesterday with Flares ripping the HS off. First a slight twist with a flat screwdriver on both sides just to get the glue loose around 1st and 8th IC, then I taped the golden pins to avoid damage and gently lifted it from the bottom applying force around each of the ICs. It took me about 40 minutes for one module, this glue was quite strong, but if you do it patiently, you should be fine. I imagine that Pis will require the same.
-
Make your bets,this is going to be the most epic sandbagging ever on hwbot,if only someone can crash the server one hour before competition ends
I wonder if we see sub-8 in Super Pi
-
All those DFIs... I like it.
-
2V looking strong
-
Kangaroos might binned and now hold a special stash of PSC from where u buy these,really nice air on ram at least and i am sure they will rock on cold.What type of IC,X.. ?
Yeah, right, Bull, I want your rejects
-
OMG dude sick volts!
-
This will come next good night!
EDIT: As I have no nice Pi32 result, I'll show Cinebench instead:
-
That might be the case, I didn't cover yellow slots, just stuck there some paper, so probably that's why it stopped working. The weather's bad last two days, it's cold and humid, so it doesn't help either. I'll wait with a hairdryer for the morning
Next stop - 231W TEC + EKWB adapter, let's see if this is able to give an edge over air benching.
-
Thx Bull, max I do on air is 1.95. I need to improve my insulation, it was first time, and I used regular kitchen towels, I already noticed water drop on the capacitors near far black slot.
The best I had was around 1380 8-12-7, but again, I consider this as "getting acquainted" with cold memory.
-
Had my first run with cold PSC today, 4690k + A-Data XPG 2000 + EK SF3D pot + DI, also my first time with DI. While I got nothing interesting in terms of CPU, mems did 1350 7-12-7 with 2.1V. I couldn't tighten TRCD to 11, more than 2.1 did not help and now mobo stops booting on 26 error code. Guess it's time to bed, will try to push it tomorrow.
-
Used wrong query - updated
[trolling]
Unless you have a covering index for that query, consider replacing application.ranking !="GPU" with something like application.ranking in (....); you'll retrieve results a few microseconds faster, after all it's all about speed here
[/trolling]
I couldn't help it, hard day at work, sorry if inappropriate. Glad I made it to the top-20, I thought I have a lot of points on 939, but didn't realize it was that much. 939 POWAH!
-
Good competition, looking forward to next one
-
Sick volts, CPU survived? good efficiency though
-
OMG 5.3 @air, monster chip, freeze it!
-
@Bullant - where can I find BIOSes you mentioned, official Z97 OCF page hosts only 1.10 and 1.30
-
Lucky me I think it's going to be tough to put something more out of my hot potato, while you still have the room to freeze yours keep pushing!
-
[FS] DFI clearout - 775, 2x939 and 462
in Sold
Posted · Edited by phobosq
Replies sent, P45 T3RSB and NF2 Infinity reserved for ZFeSS.