[[GUIDE] Skylake Memory Timings on Asus Motherboards !]

Good job, a lot of interesting information, multiple tests, it will definitely make tweaking DDR4 a lot easier.

For me, a thread of the year! Thanks Alex!

[Asrock Z170 OC Formula-DDR4]

OMG what did you do to those poor cpus?

[The official HyperX OC Takeover Season III Qualifier thread.]

my bad I look at the wrong 3d Mark

[The official HyperX OC Takeover Season III Qualifier thread.]

What about 3d Mark version? It says in requirements "â–»3DMark11 version must be 1.0.132" - I can't find it anywhere, definitely it's not the newest one.

[Skylake 6700K/6600K Batch and Serial Numbers]

Just got 6600K L536B309 from caseking. Will try it in the evening on air.

 

EDIT: VID 1.04 4500/4200 1.17V on air all stable, including XTU. I was unable to complete XTU with higher clocks. I booted 5000 with 1.3V, with 1.32V entered win 7 but kept getting freezes all the time, I need to check voltages, maybe I'm doing something terribly wrong.

 

I'm an idiot after setting PLL termination voltage to auto it is

 

5000/4500@1.36 - everything except XTU stable (Cinebenches, Geekbench, HWBot Prime, GPUPI, wprime 1024)

 

 

Air cooled, mobo is Z170 OCF, 1.43V BIOS.

 

Too scared to delid.

[Rauf - Core i3 6320 @ 4020MHz - 739 marks XTU]

You'll be equally impressive, if you post 750 right away

[Asrock Z170 OC Formula-DDR4]

I left initial RTL on auto, but played with IO Latency offsets.

Thanks for the info, I'll check it and repost.

[Asrock Z170 OC Formula-DDR4]

I think no one runs it on i3 6300 anyway, if I failed mem training with 55 on 3600C12@1.65V, does it make sense to push more volts? How far do MFRs usually scale?

I have VCCSA and VCCIO on 1.25, so IMC should not be an issue here.

[Asrock Z170 OC Formula-DDR4]

Thanks for the tip, I'll post more details later when I'm back from work, board will dry by then and no more 00 code

 

So far very happy with mems on ln2, went straight from 3200c13 to 3466c12, 3600 was no go, but I didn't have enough time to play with it and I gave up after 3 fails; it might go with more vdimm as it failed training with 55.

 

Edit - I have one screenshot with Geekbench, no thirds captured, but all auto apart from TWRRD_sg = 20 and TWRRD_dg = 16. RTL/IOL 48/50/4/5

[Asrock Z170 OC Formula-DDR4]

I've just put RAM pot on my Kingston MFR so far 3466c12 @1.55, but I noticed my efficiency is not up to par, I get similar or worse results in XTU than with 3200c13 on air. I already managed to tame RTL/IOL, on auto had them 48/57/6/14, now 48/50/4/5. I think it's in thirds, but not really sure... is it possible that I overtightened trdwr_* and twrwr_*?

 

Bad luck aerotracks hope you can fix it somehow

[minicoopers - Core i3 6300 @ 3902MHz - 4.8 points Cinebench - R11.5]

Nice result, mems 4x4 or 2x8?

[Skylake 6700K/6600K Batch and Serial Numbers]

Just got 6600K L536B309 from caseking. Will try it in the evening on air.

 

EDIT: VID 1.04 4500/4200 1.17V on air all stable, including XTU. I was unable to complete XTU with higher clocks. I booted 5000 with 1.3V, with 1.32V entered win 7 but kept getting freezes all the time, I need to check voltages, maybe I'm doing something terribly wrong.

[The official HyperX OC Takeover Season III Qualifier thread.]

CPU-Z 1.73 does not detect memory clocks/timings for me in the end I have a valid with no memory timings. 1.74 works OK.

Is it BIOS? I'm on Z170 OCF with 1.43V.

[Rauf - Core i3 6320 @ 4020MHz - 738 marks XTU]

Great score, great mems CPU can't go over 103 BCLK?

[Splave.ROM - Core i7 6700K @ 6407MHz - 3sec 93ms wPrime - 32m]

6666 MHz and you break 3 secs

[Heat conductive glue for adding heatsink to old card?]

...Same solution proposed my GF...

 

OMG dude, you're one lucky guy, mine is fed up seeing all the hardware on my desk. She even threatened to break up, when I suggested her to help me pouring LN2 last time

 

Back to main topic - I used once a clamp from socket A cooler upside down (hooks away from the card) and attached to VGA with zip ties.

[How to made a 3DMark 2001 score on Vanta LT 16MB?]

Dumb question - did you try to flash VGA BIOS with modified clocks? I remember it helped me back in a day with ocing GF2 MX.

[minicoopers - Core i3 6300 @ 3850MHz - 700 marks XTU]

I can boot with 102, but have a wall on 103 BCLK, 102.9375 benches just fine with XTU. Is it CPU limitation or BIOS doesn't want me to go higher?

[The official HyperX OC Takeover Season III Qualifier thread.]

Can I try Pentium/i3 for max clock?

[REQUEST HERE YOUR NICKNAME CHANGE PLZ]

Please change my nick in the forums to phobosq.

[The official HWBOT Country Cup 2015 thread.]

The top total will receive the 50 competition points.

 

I also understood it like that.

[The official HWBOT Country Cup 2015 thread.]

More questions about NV:

- how about Quadro vs Geforce from the same generation?

- 9800 is considered different family from 8800?

- 7800 and 7900 are considered the same family? G70 and G71 are quite different from each other

[The official HyperX OC Takeover Season III Qualifier thread.]

That's fantastic.

 

 

HyperX Fail.

 

oh and btw, you can't buy OCF here in AU either so ban it as well. :rollseyes:.

 

No problem to get Z170 OCF in Poland, just ordered one, arrives tomorrow. I checked at seller's, they can have it on stock in 4-5 days.

[[EST] Estimate my 4690k]

thanks

[[EST] Estimate my 4690k]

Hi, how much can I ask for my 4690k 3440B487 batch, non-delidded, does 4700 4c/4t air, on phase 5400 multithread, 5500 singlethread? IMC is OK, 2700+ for PSC.

I am first owner, can provide of an invoice, have the box. Didn't push it on LN2.