[mllrkllr88 - Core i9 7940X @ 5600MHz - 4884 marks XTU]

Awesome job man!!!

[Abit IP35]

Sent PM about the DFI.

[DR4G00N - GeForce GTX 780 Ti @ 1200/2000MHz - 151106 marks 3DMark2001 SE]

Thanks. I had everything running pretty lax for this run because of limited time.

[DR4G00N - GeForce 8800 Ultra @ 900/1188MHz - 431114 marks Aquamark]

Thanks! VDroop under load is about 50mV, so 1.55V @ 1.6V.

[DR4G00N - Radeon HD 6850 @ 1000/1150MHz - 144383 marks 3DMark2001 SE]

Thanks Shar.

[Gigabyte P45-UD3R+E8400 1.1175v VID / Asus Striker II Extreme + E8600 1.2375v VID / 2x4 GB Team Group 2600 CL10 1.65v]

Sent a PM about the memory.

[DR4G00N - DDR SD-RAM @ 393.3MHz - 393.3 MHz Memory Frequency]

Definitely not, only gained 2MHz from 3.2V, so I'll find another way to get it higher.

[DR4G00N - DDR SD-RAM @ 375.1MHz - 375.1 MHz Memory Frequency]

Thanks!

[Noxinite - DDR2 SDRAM @ 910.1MHz - 910.1 MHz Memory Frequency]

Awesome job Nox!

[DR4G00N - DDR SD-RAM @ 375.1MHz - 375.1 MHz Memory Frequency]

Single DIMM of Corsair CMX512-3200XL TCCD @ 375.1MHz 3-7-7-15 2T 2.9V

[HWBOT Team Cup 2017 Discussion]

Okay, thanks for the clarification.

[HWBOT Team Cup 2017 Discussion]

I'm wondering since we can use Opty's for R15 s939 are we also allowed to use said CPU's for DDR1 max frequency using s939?

[DR4G00N - 2x Radeon HD 5970 - 110470 marks 3DMark2001 SE]

GPU's at stock, no tweaks used, just straight run.

[DR4G00N - P5Q-E @ 560MHz - 560 MHz Reference Frequency]

Credit for the mobo Vmod goes to mllrkllr88 but the vmod on the gpu is all me. Thanks.

[bigblock990 - Core i7 7700K @ 6870MHz - 1554 cb Cinebench - R15]

Nice one BB!

[DR4G00N - 2x Radeon HD 5970 @ 1000/1250MHz - 7825 marks 3DMark - Fire Strike]

FYI: An 850w psu is not enough for quadfire 5970's. Throttling all the way back to stock clocks.

[halp with soldering point]

The ASP1211 is a re-branded CHL8228G so the pins you want to solder to are #23 for SDA & #24 for SCL.

 

Datasheet: http://www.infineon.com/dgdl/pb-chl8225g.pdf?fileId=5546d462533600a40153567f756728b5

[Survey: Hardware detection software usage]

Submitted.

[Using a single eVc on a Dual GPU card.]

I have to update and say that I couldn't get this to really work problem free in the end. It sometimes works and other times it just breaks the card.

I removed it for the time being.

 

Two separate eVc's are the way to go for this card. #1 for VDDC 1 & VDDCI, #2 for VDDC 2.

[culzone - Core i7 4790K @ 9589MHz - 9589 mhz CPU Frequency]

There should be an option on the menu to the right to delete the sub.

[Using a single eVc on a Dual GPU card.]

Thanks a lot, that works perfect. Both VDDC & VDDCI are fully adjustable.

[Using a single eVc on a Dual GPU card.]

As I was poking around on the card I noticed that the #1 VDDC Controller (Red) was on the same bus as the VDDCI Controller (Blue). So I connected the #2 VDDC Controller (Magenta) to the VDDCI's SCL and SDA connections. Now both VDDC Controllers are registered on the device scan (70,71) and can be controlled just fine using the Generic VT1165 Profile.

 

But the VDDCI doesn't register on the device scan even though all three controllers are connected, which I find is odd since they are all VT1165's.

 

EDIT: Hmm, yeah I don't think this'll work actually. On first boot it worked fine but on the second boot the VDDCI was locked to 1.05V and changing the voltage caused it to crash.

 

I'll try connecting them one at a time and checking the address' now.

 

EDIT #2: Nevermind, I tried it a few more times and it works great, must've been an error of some sort.

[Using a single eVc on a Dual GPU card.]

Sorry, a mistake on my part, they do not show 0Ohm but 9.5kOhm so they are indeed not connected.

 

The Generic VT1165 doesn't do anything.

 

I'll connect them with a bit of wire and see if I can get them both to register.

[Using a single eVc on a Dual GPU card.]

Got it today and wired it up. The connections from both controllers do look to be on the same bus from what I can tell.

 

Here's the Device scan file:

[Using a single eVc on a Dual GPU card.]

Ok, I'll post back once I get it.

 

Thanks.