-
Posts
525 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by jpmboy
-
-
So... show me how it's bugged?
-
-
lol - that's cool. I'll be watching.
-
Yes, already corrected the sub. the bot file is correct, but only set the submission to 1 gpu.
lol - it's not a WR. ;-)
-
Impact is a killer MB !
-
well done bro!
-
Not sure yet.
You cannot change multiplier after bootup, one of the quirks of this method. You can choose ratio by selecting "Boot Performance Mode"
- Max Battery = lowest possible = 8x
- Max Non-Turbo = CPU specification multiplier, depends on model. On some this will be same as Max Turbo.
- Max Turbo = Highest possible ratio
BTW, also add these boards
* Z170 Pro Gaming 1301
* Maximus VIII Ranger
-
questionable entry. Tmin looks rigged. Tmax at 1.7V is suspeciously low for a normally watercooled rig.
-
any reason this post was omitted from the table in the OP? http://forum.hwbot.org/showpost.php?p=381105&postcount=186
-
Hammer down! Nice.
-
You guys are gonna have to fix this. Win 7 is now 3 generations old and benchmarks are relevant to "the masses" only if acceptable on contemporary, modern operating systems. What, no DOS only benchmarks?
-
sitting on the sideline... pouting that it's only got a water chiller. ;-)
-
^^ yeah - that's why I do the gpuZ sensor panel with render test running. Guess I could fix the bios. ;-)
-
Thanks. The other card is switched off for this run (via PCIE lane switches on the MB) so gpuZ is not reporting a multigpu configuration - it will report sli disabled with only one card. JUst doing a few single card runs then will turn the other card on for sli runs when I have some time. :thumb
-
buy them all
lol - so many folks PMing .. will buy the rest tomorrow. :-)
-
Congrats:)
Batch J510.... or J513 are very strong.
Dancop got one and I have one.
I am doing 4.9ghz on a water loop ( see my sig ), with only 1.41V.
I am also doing uncore 4.7ghz with only 1.45V.
ALL benchmarks including XTU and CBR15.
2.00V Input ad 1.20V SA.
Pretty tight on timings also with 3200 G.Skill on 13-14-16-16-1T-270trfc
with 1.48V !!!
I can do 12-13, but I need 1.6Volts and since my ram sticks are on air I do not want to risk any damage.
No chiller ... yet.
I am thinking of buying two Priotres chillers ( one for the cpu and one for the Titans ).
Still avoiding LN2 though...Lol.
Enjoy your fantastic cpu.
P.S. Cyclops3 bios rocks. Since you created it BRAVO.
Kudos to you buddy.
My four Titans fly on water with your bios.:celebration:
you are welcome (re: cyclops3).
j513 seems pretty good, getting x264 stable took a bit more:
4.6/4.3 with 1.216V/1.25V. 4.7/4.3 x264 stable is 1.275V/1.25. both with 1.95V VCCIN, LLC 6 *~ 65mV droop). boots 5.0 at 1.4V but not bench stable.
local store has 2 more of this batch :-)
-
J513B008
4.5 with 1.16V, cache 4.25 with 1.2V
4.625 with 1.200V
-
Unfortunately, this very important topic has gone cold. At the point where Win 8, 8.1 and 10 are barred from all but Futuremark 3D and a few (very few) cpu benchmarks, things look pretty bleak going forward for The Bot. And that is very sad.
-
lol - it helps... Thanks. Water temp was ~ 15C
-
-
Hey thanks! it's a 295x2 tho... so pretty limited.
Me? you're crushing scores! modded TX?
-
thanks bud! minhund=MyDog?
-
I know, right? Amazing gpu!
-
jpmboy - GeForce GTX Titan X @ 1598/2138MHz - 23083 marks Catzilla - 1440p
in Result Discussions
Posted
erm - I'd have to pull GPUs from rigs and rearrange. block or I'll delete it. I guess every high score gets such scrutiny. ;p