sabishiihito
-
Posts
379 -
Joined
-
Last visited
-
Days Won
7
Content Type
Profiles
Forums
Events
Blogs
Posts posted by sabishiihito
-
-
Doesn't look like tighter timings are happening at 2666, I'm just glad the pre-set profile passes.
-
-
Been looking/waiting for a good DDR4 OC primer.
-
-
-
I can boot 2666C8 just fine loading the preset, but still haven't finished a 32M run as of yet,
-
-
It's just infuriating trying to figure out if the sticks can't do the timings/speed, or CPU IMC can't handle it, especially with all the voltages you have to tweak (VCCSA, VCCIOA, VCCIOD, VDIMM, VCORE, VRING, VRIN)!!
-
Does anyone have a quick and dirty method for binning Haswell IMC on PSC/BBSE 2600C8+?
-
-
Asus M6F and Asrock OCF. Then again I've never had much success with PSC or BBSE on any boards, even stuff like 2133C8 Ripjaws X. This is using multiple CPUs too.
-
Got in some 2014 serial Ripjaws X 2200C7 PSC, still struggling to get over 2400 even trying the incremental training method
- 1
-
I think all of my PSC is wounded.
-
Well I can boot 2600, but SPi32M fails almost immediately no matter the VDIMM.
- 1
-
I think something is wrong with the board itself, takes a long time to boot, simple settings fail (even cmos reset).
EDIT stupid H100i usb header cable was the problem.
-
I can't even boot at 2400 using X04 :-O
-
-
When training from 2400 first, should you set your timings as if you were going straight to 2666?
-
Good stuff. Any tips for PSC on air with this board?
-
Wish I had paid more attention to this guide, I killed a 4770K and a 4790K with my M6E trying to run PSC/BBSE at 2600+ with Full Manual settings.
-
-
Wow how much ring bus voltage do you need for 4.5GHz uncore?
-
-
Asrock Z97 OC Formula-PSC
in Memory Heaven (air/extreme)
Posted
tWCL to 6 and some of the tertiaries from 6 to 5 or 4, 13 to 12 or 11.